| Material || Br |
| Shape || Y-shape 3 ways |
| Model || 6mm, 8mm, 10mm, 12mm&sp; |
| I.D of tube || 6/8/10/12mm |
| Head || agon |
| Fluid || Clean compressed air, vacuum |
| Heat resistance || 100 鈩? |
| resistance || 100 (MPa) |
| . working || 1.32Mpa (13.5kgf/c銕? |
| Normal operating || 0-0.9Mpa (0-9.2kgf/c銕? |
| Low service || -99.99-0Kpa (-750-0mmHg) |
| Envnment and fluid temperature || 0-60掳C |
| Connection || Barb qui connection |
| Use hose || PU tube, nylon tube |
| Fluid type || Oil, Water, Gas |
| Alication || Pneumatic accessories, plumbing accessories, water pe fitting etc. |
- Made of br castings, thiened walls, fine threads, durable.
- Molding technology is adopted.It has the advantages of anti-leakage, qui connection and long life.
- The vae body is extra thi with the standard of inch thread, which can effectively prevent it from bursting due to excessive during operation.
- The R pe is elaborately built with good sealing peormance, smooth inner wall and smooth water outlet, preventing from scaling and leakage.
- After multle precision stamping, the extremely high metal igue resistance is easy to install and free of air leakage. Took note:
1. To confirm that the cut suace perpendicular to the tube.
2. When the plug is inserted into the bottom of the tube must be joint, the tube is not inserted in the end of may cause leakage.
3. Precautions After tping pe to pull the pe joints to confirm tube could not pull disembly.
4. Use the right tools, the use of the pe joint partially disembled fittings.
5. To remove the pe joints with sealing material adhered to the oosite party. wise adhered sealing material may enter.
6. Perheral components, resulting in fai. Paage Included: