Smart Sensor AR991 Digital Grain Moisture Meter Analyzer Tester

Smart Sensor Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection. Grain Can Be Measured: rapeseed, sesame, soybean meal, cotton, soybean, peanut, barley, rice, sorghum, watermelon seed, paddy, wheat, maize, fodder

1. Measuring range: Moisture is 7.5%-50%

 2. LCD backlight: You can control see it clearly in a dark environment.

 3. Auto power-off: It will be shutdown in 15minutes without any operation.

 4. Double sensor for high accuracy and stable performance.

 5. Can choose grain species by pressing the key "Varieties".

 6. Includes low battery indication, data hold, deviation adjustment and alarm setting functions.

 7. The moisture meter can quickly measure the moisture content in grain.

 8. The probe is well protected by a plastic cover, not easy to be damaged.

 9. Memory function setting: If the batter was removed, the setting content will never disappear.

10. Measurement 14 kinds: Paddy, Wheat, Corn, Barley, Rice, Sorghum, Feed, Rapeseed, Seed melon, Sesame, Soymeal, Soybean, Peanut, Seed Cotton.

Specifications:

Grain Can Be Measured: Rapeseed, sesame, soybean meal, cotton, soybean, peanut, barley, rice, sorghum, watermelon seed, paddy, wheat, maize, fodder

User's guide

 1. Display:  English characters with a low-power digital LCD backlight. Low-power backlight Description: Backlight will be off when no Measurement, and the backlight will be on when measuring

2. Voice-Over:  Instrument setting, testing, inspection, all accompanies by voice reminder. Language: English voice-over includes the following

4 modes: d1= the moisture content readings, /d2= High moisture content /d3= Voice-over off, /d4= bip-sound

3. Mode change:  Oven control calibration method, user can adjust -3% to + 5%. Click the “Adjust" button to adjust the loop gain value, first

Addition and then subtraction. After amendment, press the “ON/OFF" button for 2 seconds, the setting will be saved when shutting down.

4. Speed mode Alarm setting:  Adjustable, factory default alarm is 10%

5. Memory function setting:  If the battery was removed, the setting content will never disappear, to save the setting content, press the “ON/OFF" button for?

2 seconds. The setting will be saved when shutting down.

 6. Lower power reminder:  When battery power is low, the battery symbol on the LCD display will be blank, then user should replace the battery.

7. Measuring principle and sampling method:  Resistance method and continuous sampling.

8. The upper and lower limits of moisture measurement:  Insert the meter to the measured of the meter, the meter can measure the moisture of the measured object, when the measured? Object was too dry below the minimum measuring range, the meter will display" LO" for no result. When the test was too wet exceeded the?  Maximum measuring??Range, the meter can only display “Limit"

9. Single measurement:  When the probe of the meter is inserted in to the measured object, and the moisture content was within the measuring range, the LCD display will show the moisture reading for few seconds, and voice-over will report the reading immediately.