3S/2S 10A 20A 25A 30A 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For Drill Motor Lipo Cell Module

Package : SMDis_customized : YesModel Number : 3S 20A Li-ion Lithium BatteryOperating Temperature : 1Dissipation Power : 1Supply Voltage : 1Application : ComputerCondition : NewType : Voltage RegulatorBrand Name : TENSTAR ROBOT : Mainland ChinaFeatures: Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection,it need to first charge activation, then will have the output. Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying Package Included: 1 x PCB Protection Board3S 10A: Size: approx.50x16x1mm Maximum discharge current: 10A Overcharge detection voltage: 4.25-4.35V±0.05V Over-discharge detection voltage: 2.3-3.0V±0.05V Maximum working current: 5A-8A Transient current: 9A-10A Operating temperature: -40~50° Storage temperature: -40~80° Quiescent current: ＜6uA Internal resistance: ＜60mΩ Service life: ＞30,000 hours Short circuit protection. Overcharge protection. Over-discharge protection. Overcurrent protection. Can be applied to various 3.7V lithium core. Compact size and lightweight. Fine workmanship and durable. Ensure the security of battery pack. Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage)