915 Generation Smart RFID Car Alarm System Push Engine Stop on Lock Ignition Immobilizer with Remote Keyless Go Entry System 12V

Operating Instructions Into the anti-theft 15 seconds after each turn off the 1 said the system has entered the anti-theft state then the on lights turn off the whole car power operation is invalidExit the anti-theft When the ID sensor card near the car in the induction coil area this time the tweeted 2 said the system has been revoked anti-theft on immediately power flash the vehicle can at any time
A key to foot brakes short press on 1 after the release that is the vehicle automatically activated after 05 secondsA key off foot brakes short press the on 1 after the release that is the vehicle immediately turn offA key to open the sound do not step on the foot brake short press a key to the on to open the sound the function as the key hit the first file
A key to open the instrument panel do not step on the foot brake has been opened on the basis of sound and then press a key to the on to open the instrument panel then the instrument panel power function as the key hit in the second file
Parameters Operating voltage DC = 12V no support 24V power supplyStandby current 8mA Note continuous standby up to a monthon display blue light Note in the -resistant state of the blue light off anti-theft after the anti-flashInto the anti-theft each time off the fire 15 seconds the system automatically locks the engine the whole car off the on lights off
Exit the anti-theft on the using the ID card proximity sensor coil the tweeted 2 out of the anti-theftBrake light output flashing voltage DC = 12V Note the output time controlled by the foot brakeBrake light output form each brakes after the first brake light flashing 4 and then long bright loose feet offAlarm brake light alarm when the car on the illegal brakes the brake light will flash alarm for 15 seconds

Use Conditions can be used for no remote control and no anti-theft models such as caravans small A0 car after installation the vehicle will have a key to and a key to turn off the function dark lock anti-theft function brake flash function and brake alarm function
B can be used for the installation of such as iron general anti-theft device PLC alarm and the installation of ordinary anti-theft vehicles the installation will be more function protection security greatly increased also has a key to and a key off Function dark lock anti-theft function brake flash function and brake alarm function
C can be installed with the PKE smart keyless entry into the anti-theft device used to make the vehicle more intelligent and humane also has a key to and a key to turn off the function dark lock anti-theft function brake flash function and brake alarm function
Note
When the installation of a key to plug the key screwed to the file to the original car steering wheel lock this time to the original car lock behind the ignition plug unplugged to prevent the key in the file when the original car audio power
colour Black
Material ABS

Package Contents
1 set * rfid smart engine stop push on
1*English instruction manual

Only the above package content other products are not included
Note Light and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm