ABRO 999 RTV Silicone Gasket Maker (85g, Grey)

ABRO Grey RTV Silicone Gasket Maker 999 is a neutral cure/low odour product designed for high temperature applications. Safe for use with Oxygen sensors when fully cured, is non corrosive and is heat resistant up to 343°C
 

Oxygen Sensor Safe

Neutral Cure, Low Odor

Effective Up to 650°F (343°C)

Designed Specifically for Import Engines

Sealant sealant ABRO Gray 999 (gray) 85 gr - Silicone sealant sealant ABRO 999 is specially designed for repairing gaskets in Japanese car engines, but can also be used in engines manufactured in the USA and Europe. Ideal for replacing gaskets in gearbox housing, thermostat housing, intake manifold, oil pans, water pumps. Does not break down under the influence of automotive fluids (with the exception of gasoline).

On a neutral basis (odorless)
High temperature - up to 343C
Safe for sensors (lambda probes, etc.)
Resistant to oil, antifreeze, water

METHOD OF APPLICATION:
1. Remove fragments of the old gasket and thoroughly clean the surface.
2. Remove the cap, pierce the protective foil and screw on the included nozzle. Cut off the tip of the nozzle so as to create a hole of the required size.
3. Apply along the perimeter to the entire mating surface (preferably only to the cover itself), forming a layer 2-3 mm thick. Leave holes for mounting bolts.
4. Allow to dry for 10 minutes before assembly. Then compress both glued parts by screwing the fixing bolts. Time of pasting of metal parts - 1 hour. Complete drying of the formed gasket occurs in 24 hours.