AG5300 DP5300 Pin Type 24V1A Supports 100M Gigabit POE Mod

Detailed Information About The Product:

Name：AG5300 DP5300 Pin Type 24V1A Supports 100M Gigabit POE Module Module
Fully supports IEEE802.3af/at
Small Single In-Line (SIL) package size -57.3mm (L) x 14mm (H)
Input Voltage Range 44V to 57V
Support PoE applications in both of Fast / Gigabit Ethernet environments.

Short Circuit Protection
Over-temperature Protection
Programmable Classification (Default:Class 4)
High Efficiency
Isolation level 1.5KVrms.
Easy Installation and Low Cost (Isolation Type, Minimum External Devices required)
Low Output Ripple and Noise
Adjustable Output Voltage
1500Vrms Isolation (Input-Output)
1VIN+POE Direct Input +. This pin connects to the positive (+) outputof the POE input bridge rectifiers.
2VIN-POE Direct Input -. This pin connects to the negative (-) outputof the POE input bridge rectifiers.
3NCInternal Connection. Do not connect to this pin.
4NCInternal Connection. Do not connect to this pin.
5-VDCNegative DC Output. This pin provides the negative regulatedoutput from the Ag5300 and is internally connected to pin 8.
6+VDCPositive DC Output. This pin provides the positive regulatedoutput from the DP5300.
7ADJOutput Adjust. The output voltage can be adjusted from its
nominal value, by connecting an external resistor from this pin to either the +VDC pin or the -VDC pin.
8-VDCNegative DC Output. This pin provides the negative regulatedoutput from the Ag5300 and is internally connected to pin 5.
Colour: black
Material: PCB

Package Contents:
1 * POE module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.