Apc Smart UPS C 1000VA

The APC Smart-UPS 1000VA LCD 230V (SMC1000I) is an efficient  APC UPS that provides reliable network power protection. It is designed for servers, point-of-sale systems, routers, switches, hubs, and other network devices.

With its line-interactive topology, this UPS-Uninterruptible Power Supply & power Back Up ensures that your equipment remains protected and operational even during power disturbances.

Features

• Capacity and Power: Delivers 700 Watts / 1.0 kVA with 8 IEC 320 C13 outlets, accommodating a variety of critical devices.
• Output Voltage: Standard 230V, with support for 220V and 240V configurations.
• Tower Form Factor: Designed for standalone use in environments where rack mounting is not required, ensuring easy placement.
• Line Interactive Topology: Corrects low and high voltage conditions without using the battery, enhancing efficiency and extending battery life.
• Pure Sine Wave Output: Ensures compatibility with sensitive equipment and active PFC (power factor corrected) servers.
• Intuitive LCD Interface: Provides clear status information and allows for easy navigation and local configuration.
• SmartConnect: Enables remote monitoring with automatic notifications, firmware updates, and advanced support.
• Energy Meter: Monitors actual energy usage, aiding in energy-conscious management.
• Green Mode: Achieves high efficiency by bypassing unused electrical components during optimal power conditions.
• SmartSlot: Allows for customization with optional management cards to enhance functionality.
• Temperature-Compensated Battery Charging: Extends battery life by adjusting the charge voltage based on ambient temperature.

Specifications

• Output Power: 700 Watts / 1.0 kVA
• Output Connections: 8 x IEC 320 C13 (Battery Backup), 2 x IEC Jumpers (Battery Backup)
• Output Voltage: 230V (configurable for 220V or 240V)
• Input Voltage: 230V (supports 220V and 240V)
• Input Connections: IEC 320 C14
• Efficiency: High efficiency with energy-saving modes
• Waveform Type: Sine wave
• Transfer Time: 6 ms typical, 10 ms maximum
• Battery Type: Lead-acid
• Nominal Battery Voltage: 24V
• Typical Recharge Time: 3 hours
• Replacement Battery: RBC6
• Expected Battery Life: 3-5 years
• Battery Charge Power: 88 Watts

Physical Dimensions

• Height: 21.9 cm
• Width: 17.1 cm
• Depth: 43.9 cm
• Net Weight: 19.4 kg
• Color: Black

Communication & Management

• Interface Ports: SmartSlot, USB
• Control Panel: Multifunction LCD status and control console
• Emergency Power Off (EPO): Optional
• SmartConnect: For remote power monitoring and management

Surge Protection & Filtering

• Surge Energy Rating: 459 Joules
• Filtering: Full-time multi-pole noise filtering, meets UL 1449

Common FAQs

• What devices can the APC Smart-UPS 1000VA support?
  This UPS is suitable for a wide range of devices, including servers, point-of-sale systems, routers, switches, and hubs.
• How long does it take to recharge the battery?
  The typical recharge time for the battery is approximately 3 hours.
• What is the advantage of using pure sine wave output?
  Pure sine wave output ensures that sensitive equipment operates correctly and efficiently, particularly for active PFC servers.
• How can I monitor the UPS status remotely?
  The SmartConnect feature allows for remote monitoring, providing automatic notifications and firmware updates.
•  What is the expected battery life for the APC Smart-UPS 1000VA?
  The expected battery life is typically between 3 to 5 years, depending on usage and environmental factors.

Included Accessories

• Cat 5 Ethernet cable
• USB cable