Commercial Juice Extractor Heavy Duty Juicer Aluminum Casting and Stainless Steel Constructed Centrifugal Juice Extractor Juicing both Fruit and Vegetable

This type of Juicer is very popular with users all over the world.  It is designed with 5-grade gear transmission for less power consumption, driven by heavy duty motor and controlled by pressing buttons to turn on or turn off. It has three stainless steel rollers, can crush fruits and vegetables to very perfect result. This particular model offers a better appearance, and it applies to all kinds of fruit juice shop. It also can be used in home, hotel, restaurant, super market etc. When you use it, Please note 1. After you use the machine, please wash it with water.  Try to avoid use chemical substances such as detergent. Because this step can ensure the surface oxide layer finish. 2. Fruit containing seeds (grapefruit, watermelon etc). Please remove the seeds before the juice, to avoid motor overloaded power off. 3. After the motor power-off protection, please wait until the motor re-opened after cooling, and entend the service life. Before Using: 1. Put the machine in a flat place. 2. Adjust the roll gap, clockwise to tighten and counterclockwise to loose. Starting from the smallest gap, counterclockwise a circle, roll gap increased by 0.06"(1.5mm). 3. Wash the machine before use. Operation Steps: 1. Choose the proper power. 2. Cut a wedge on the sugarcane before put it into the machine. 3. Starting the processing. 4. After squeezing finished, you should wash the rollers timely, make sure no sticky in juice box and keep it clean. Note: 1. Can't adjust the roll gap too tightly. 2. The ground wires should be attached to the machine. 3. Only the outside cover are stainless, inside rollers are designed to be galvanized iron due to pressure requirements.