Finest Fries/Chips Cutter- Stainless Steel Potato Chipser

Prepare lovely, straight chips in seconds with the Master Class Stainless Steel French fry cutter. With its easy lever arm action, it only takes a gentle push to cut a potato into 36 perfectly sized chips . It’s so much easier than using a knife.

Tips:
1. It is very important to suction the cutter and make sure no movement during using
2. The fry length is 3-1/2 inches at most, large potatoes should be cut the ends off or cut it in half and then place the flat side downin the cutting bay
3. If need to make sweet potato fries, please microwave the sweet potato for 2 minutes or cook them slightly to soften it up
4. Blade maintenance: the blade aids cleaning after cutting 2or 3pcs potatoes and keep the blade dry

Easy to use: 
1. Place the cutter on a flat work surface, and then push the handle down
2. Align the corresponding pusher grid on the stainless steel plate and turn the knob to the left to lock into place
3. Cut the ends of the potato to make it easily balances on the cutting board
4. Place a potato inside the main compartment, push down the lever/handle, and you'll get your perfect shaped sticks. ( please do not overload the chute which causes it to block. Only load in slender potatoes or simply cut hefty tubers in two.)

• With this practical potato chips cutter, it allows you to easily make tasty homemade chips at home.
• It cuts potato into chips in seconds, which not only makes the cut work safe but also effort-saving.
• The vegetable cutter is made from high quality stainless steel material, easy to rinse and clean after every use.
• The non-slip rubber feet ensures that the potato cutter doesn't move around on your countertop while cutting potato.
• With two interchangeable slicing blades, 36 holes blade is perfect for steaks and 64 holes blade is perfect for burgers.