Fit For Mercedes-Benz E-Class w213 CLS Car TPMS Tire Pressure Sensor TPMS Sensor 433MHZ 0009052102 A0009052102 36106887140

Selling Point

Note1:

Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.

Note2:

【No sensor programming Required】 :
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : OBDII required
Installation of TPMS is recommended to be performed only by trained professionals.


Application

For Alpina XD4(from 2018-09 to 2025-09)
For BMW 5-Series [G30](from 2018-03 to 2018-12)
For BMW 6 Gran Coupe [F12](from 2018-11 to 2019-12)
For BMW 7-Series [G11](from 2018-03 to 2018-12)
For BMW X3 [G01](from 2018-03 to 2018-12)
For BMW X4 [G02](from 2018-06 to 2025-06)
For BMW X5 [G05](from 2018-10 to 2026-10)
For BMW X6 [G06](from 2019-11 to 2027-10)
For BMW X7 [G07](from 2019-03 to 2025-11)
For Mercedes-Benz?E-Class [W213](from?2016-02?to?2023-06)

SPECIFICATION :
Replace For Part Number:
6887140-01, 36106872803, 36106872774; 36106872803; 36106876955; 36106876957; 6876955-02; 6887140-01; 6887140-02; 6887147-01; A 000 905 21 02 Q07; A0009052102; A0009052102Q02; A0009052102Q04; A0009052102Q06; A0009057105

Battery Life: ABOUT 3 YEARS
Operating Frequency: 433MHz

PACKAGE CONTENT :
NORMAL PACKET

COMPREHENSIVE VEHICLE COVERAGE

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

FAQ

Q:【 Frequently of TPMS sensor】

A: 433mhz

Q: 【Did they tpms sensor need to make program】

A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool oar "re-learning".

Q:【 Relearn Procedure 】

A: No tools needed