0.5 mm 2 Core Flex Cable – Cable Connect (90M Roll)

???? Product Overview

The 0.5 mm 2 Core Flex Cable – Cable Connect (90M Roll) is a light-duty twin-core flexible copper cable engineered for precision wiring in low-current electrical systems. Designed for domestic and commercial use, it’s perfect for lamps, decorative lighting, small appliances, and control wiring where flexibility, clean finishing, and reliability are key.

Each 90-meter roll features 99.9 % pure annealed copper conductors, insulated in high-quality, flame-retardant PVC. This combination ensures smooth current flow, high flexibility, and excellent resistance to heat and abrasion. Manufactured by Cable Connect and distributed by Macire, the cable meets KEBS and IEC standards — providing electricians and installers with consistent quality and dependable performance in every application.

⚙️ Technical Specifications

???? Application Areas

✅ Decorative and indoor lighting systems
✅ Low-power electronic devices and lamps
✅ Table fan and control wiring
✅ Interconnections for switches and sockets
✅ Extension cords for light circuits
✅ Audio, signal, or control wiring setups

???? Installation & Setup Tips

Identify conductors correctly before connection (Brown = Live, Blue = Neutral).

Recommended circuit protection: ≤ 6 A.

Install inside conduits or trunking to prevent damage.

Avoid sharp bends and maintain minimum bend radius ≥ 4 × cable diameter.

Test insulation resistance after laying.

???? Care & Maintenance

Store roll in a dry, shaded area to preserve insulation.

Keep cable ends sealed with tape to prevent oxidation.

Clean sheath gently using a dry cloth.

Replace immediately if sheath shows cracks or cuts.

⚠️ Do’s & Don’ts

✅ Do use for low-load electrical installations only.
✅ Do handle with care during installation to prevent insulation damage.
❌ Don’t overload beyond rated capacity.
❌ Don’t use outdoors unless protected with conduit.
❌ Don’t expose to oil or direct flame.

☀️ Integration & Compatibility

The Cable Connect 0.5 mm 2 Core Flex Cable integrates seamlessly with Macire lighting systems, sockets, switches, and power accessories. It’s ideal for indoor decorative circuits and general-purpose light wiring requiring neat finishes and flexible routing.

Compatible with:

Macire Lighting Accessories ???? – wall lamps, pendants, chandeliers

Macire Electrical Fittings ⚙️ – sockets, plugs, switchgear

Macire Solar Kits ☀️ – control and LED connections

???? Performance / Capacity Guide

❓ Mini FAQ

Is it pure copper? Yes – 99.9 % annealed multi-strand copper.

Can it be used for lamps or LED lights? Yes, ideal for small loads under 6 A.

Is the roll continuous? Yes, 90 meters unbroken.

Is it flexible? Extremely – designed for smooth conduit installation.

Is it KEBS certified? Yes, KEBS and IEC approved.