12 WiFi Relay Module for APP e Control S-loDC 8V-28V AC 85V-250V Wireless Switch for Smart Home

eWelink 12-way wifi e ligent relay adapter switch 433 e control inching s-locking

The module supports 4 control methods:

1. ewelink e network control, as as the device is online, wirele distance

2. Establish a scene mode in the APP and automatically control it.

3. Close range RF433 e control, depending on the power of the nsmitter, normal 0-50M

4. External physical switch control, manual control

Module size: 99*87*20mm

boards are divided into: according to power supply:

1: DC-8-28V+Type-C 5V power supply

2: AC85-250V+Type-C 5V power supply

The layout of different power supply models is slightly different.

eWelink 12-way module manual:

● Use eWelink for mobile apps (supporting Apple and Android phones): Search for "eWelink" in the mobile market or on the app, download, install, and register it;

●Add 1-4 s: Pre and hold the "A1" on on the module until the light fes 3 times (if powered on, it does not need to f 3 times), and then operate the add device on the phone;

●Add 5-8 s: When the module is powered off and restarted, pre and hold the "B1" on on the module (if there is no B1, pre A5) until the lights f 3 times (if powered on, there is no need to pre the interval f 3 times), and then operate the add device on the phone.●Add 9-12 s: When the module is powered off and restarted, pre and hold the "A9" on on the module until the light fes 3 times (if powered on, it does not need to f 3 times), and then operate the add device on the phone.

●If you can't find it on your phone all the time, please exit the app and try again. Repeat the operation several times (remember to power off and restart the module).Note: Due to the characteristics of the eWelink Network module, the APP needs to add three eWelink Network modules, each module controlling 4 relays to achieve control of 12 relays.

APP function setting instructions:

Support the mobile eWelink APP function settings as follows:

1. Jog: Maximum time 59 minutes and 59 seconds

Timing: Up to 23 hours and 59 minutes

Delay: Up to 23 hours and 59 minutes

Fully open,

Fully closed,

2. Interlock, supporting all interlocks, that is, only one relay can be activated.

3. Power-on status, supporting power-on on, power-on off, and restoring the state before power-off.

4. Support for sharing devices

5. Supports offline reminders

6. Support for querying operation records

7. Support device name change and corresponding name change

8. Support scenario linkage settings.

【 RF 433MHZ e Control Function Description 】 (supports 433mhz e control) (If there is any fing that does not comply with the step sequence during operation, please power off and restart to try again),

Attention: To restart after power outage, wait for the indicator light to f completely before operating;

Action explanation: S locking (pre once to open, then pre once to close)

Action explanation: Jog (pre once to open, automatically close after about 0.5 seconds)

Action explanation: Pre the lo(hold it down and do not release, release and close)

Action explanation: Only on (this key can only be turned on and cannot be turned off)

Action explanation: Only close (this key can only be closed and cannot be opened)

(Learn s-locking) Quickly pre the "Settings" on 5 times, and relay 1 will f. (Clithe Settings on to change the relay number to be learned) At this time, pre and hold one key on the e control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learn to jog) Quickly pre the "Settings" on 6 times, and relay 1 will f. (Clithe Settings on to change the relay number to be learned) At this time, pre and hold one key on the e control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learn to pre the lock) Quickly pre the "Settings" on 7 times, and relay 1 will f. (Clithe Settings on to change the relay number to be learned) At this time, pre and hold one key on the e control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learning only opens) Quickly pre the "Set" on 8 times, and relay 1 and 2 will f simultaneously. Pre the "Set" on once to change to relay 1 fing (continue to clithe "Set" on to change the relay number to be learned). At this time, pre one key on the e control to complete the learning;

(Learn only to close) Quickly pre the "Set" on 9 times, and relays 1, 2, and 3 will f simultaneously. Pre the "Set" on once to change to relay 1 fing (continue to clithe "Set" on to change the relay number to be learned). At this time, pre one key on the e control to complete the learning;

(Learn to fully open) Quickly pre the "Set" on 8 times, and relays 1 and 2 will f simultaneously. At this time, one key of the e control will learn to fully open, complete;

(Learn to fully close) Quickly pre the "Set" on 9 times, and relays 1, 2, and 3 will f simultaneously. At this time, one key of the e control will learn to fully open, complete;

(One on in the learning area controls relay 2.3.8 at the same time): Pre the "Set" on 5 times, relay 1 fes, pre the "Set" on 1 times, relay 2 fes, pre the "Set" on 3 times, relay 2 and 3 f simultaneously, pre the "Set" on 8 times, relay 2.3.8 fes at the same time. At this time, pre and hold on 1 on the e control until the relay light changes, release, power off, and restart, complete.

Additional function: Set relay 3 to jog for 200 milliseconds (note: if the indicator light is incorrect midway, power off and restart immediately):

(1) Quickly pre the "Settings" on 11 times, observe that the indicator light next to the settings on keeps fing 3 times, and relay 1 lights up,

(2) Pre the "Set" on once, and relay 2 will light up,

(3) Pre the "Set" on once, and relay 3 will light up,

(4) Quickly pre the "Settings" on twice and observe the indicator light next to the settings on fing at a constant speed,

(5) Pre once to set relay 3 to remain on,

(6) Pre the "Set" on three times, and relay 3 will jog for 100 milliseconds

(7) Pre the "Set" on three times, and relay 3 will jog for 200 milliseconds,

(8) Pre and hold the 'Settings' on for 2 seconds to save and exit, complete.

Repeat (5), (6), and (7) to reset, with a minimum jog speed of 50 milliseconds

(Reminder: You can continue the operation by preing 3 times above. Each time you pre 3 times, it increases by 100 milliseconds. If you pre 2 times, it increases by 50 milliseconds. If you pre 4 times, it increases by 1 second.)

● Factory reset:

Pre and hold for 10 seconds, observe that the indicator fes 8 times, and all are deleted succefully.

Support: Inching, s-locking, interlocking, timing, delay

Reminder:

Due to the continuous upgrading of the product, slight changes in the layout of the components are normal. If there are any mandatory requirements, please e notes and explain them. Please consult and communicate more before purchasing.