12V Car Relay Voltage Automotive Electronic Relay LED Indicator Light Universal Car Battery Checker

Product Description:

CNBJ-707

is a quigo/no-go relays that provides with indication of the

general health and functioning of the most common Automotive relays.

will chefor proper functioning of the relay contacts by

connecting the car battery (11V--15V) to the relay . will

watch the pin configuration,the time to contacts closure and opening,

consistency of the relay during each test seion, will light the

GREEN LED if all paed during the test seion,if not light the RED

LED.

Introduction:

1.Connect the power leads to the car battery --blaalligator clip to

negative terminal, red alligator clip to positive terminal.

2. is powered up when the LED illuminates in RED.

3.Chethe relay before pluing into the . If it's a 4 pin

relay,select"4 pin" on the .If it's a 5 pin relay, select"5 pin"on

the .

4. Plug in the relay into one of the three receptacles.

5. Pre the "TEST" on.

6. will chethe pin configuration of the unknown relay.

will light the RED LED if the unkonwn relay is not the same to the most

of common automotive relaysor the pin of the unknown relay is destroyed.

7.will open and close the relay 10 times for testing the time to contacts

closure and opening if the pin configuration of the relay is right.

will light the RED LED immediately if the time is overtime.

8. will chethe consistency of the relay after testing the time

to contacts closure and opening ten times. will light the GREEN

LED if the test paed, if not light the RED LED.

9. Disconnect power leads from the car battery and remove relay from the .

Attention:

1. The car battery must be 12V battery, and the voltage of the battery is among 11V-15V.

2. Ideal for resistance above 20 s.

Package Included:

1 x Car Relay