1‑60MHz Shortwave SWR Antenna Analyzer Meter Tester For Ham

Description::
This is a SWR analyzer for ham hobbyists. With 5
buttons, "Mode", "Band", "Config", "Scan", "Up", "Down",
you can selects operation mode, band and extended functions. It is
powered by DC 12 to 14V 500mA external power with 2.1mm power jack, and can be used to m
easure antenna electrical parameters, SWR, impedance (resistance + reactance), capacitance, inductance,
feed-point impedance
,
ground loss
, etc.
Description::
SWR usable measurement range of this analyzer is 1.0 to 9.99.
step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz.
Powered by
DC 12 to 14V 500mA
e
xternal power with 2.1mm power jack(center pin positive),
just connect the power and then work
.
5 operation buttons are easy and convenient to operate. You can s
elects operation mode,
band
and
extended functions.
Beautiful and simple designed black case would protect the antenna
analyzer from
external
damage.
This would be
a great SWR a
ntenna
analyzer for ham hobbyist or professionals.


Specificationss:
Frequency Generation & Control: 1 - 60 Mhz
Source Impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
SWR Usable Measurement Range: 1.0 to 9.99
Impedance: Approx. 5 to 2000 ohms
RF Output: Adjustable 2.0 Volts pp (typ)
Power Supply: Powered by external 12 to 14V DC, 500mA
Push Buttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors: RF
USB: Mini-B receptacle
External Power: 2.1mm Power Jack (center pin positive)
Size: 150 x 90 x 40mm / 5.9 x 3.54 x 1.57"
Applications:
1. Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
2. Measure feed-point impedance
3. Measure ground loss
4. Adjust antenna tuners and determine loss
5. Measure inductors and capacitors
6. Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
7. Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
8. Determine characteristic impedance of transmission line
9. Coaxial Cable Loss
10. Determine antenna tuner loss
11. Measure balun loss
12. Measure inductor Q
13. Estimate quartz crystal parameters
14. Measure magnetic loop resonance and SWR
Operation Button Function:
Mode: Selects operation mode, impedance(default), complex impedance, capacitance, and inductance
BAND: Select band from any of the available bands, 160M to 6M
CONFIG: Provides menu for configurations and extended functions, PC
Link, step size setting, suspend timeout setting, calibration, and
software upgrade
SCAN: Pressing this control initiates a scan of
frequencies of the selected BAND. Scan exits to impedance mode showing
the 2:1 bandwidth and the resonant point o the antenna
CAN(up): Increase frequency and used to cancel operation for CONFIG menu
VAL(down): Decrease frequency and used to validate operation for CONFIG menu
Package Includes:
1 x Analyzer(Power supply is not included)
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Products only include analyzers; Customers should provide DC5.5*2.1mm power cable and coaxial cable.
.