18650 Lithium Battery Capacity Tester Module MAh MWh Digital Battery Power

2Ch 4CH 18650 Lithium Battery Capacity Tester Module MAh MWh Digital Battery Power Detector Module 18650 Battery Tester Type-C Auto Charge

If you need see instruction , may you see the following link

4 Channel Battery Tester Data link: （English）

https://www.banber.com/banber/6374be9b2ee0e200077ec156

2 Channel Battery Tester Data link: （English

https://www.banber.com/banber/630d8a91f2d1141ad456b7d3.html

4CH 18650 Lithium Battery Capacity Tester Module

Product features: The product supports four-channel capacity and internal resistance measurement Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode Each channel is independent of each other, set separately, operates independently, and does not interfere with each other 18650 battery holder uses compact battery holder, suitable for flat-head battery measurement Active cooling of fan supports overheating protection Using DC two-wire method to measure internal resistance Note: lithium phosphate battery charging is not supported Basic parameters Working voltage: DC5V Applicable battery: suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and starting from 2.8V to 4.2V Power supply interface: Two-way Type-C power supply interface (power supply and power cord are provided) Systemguage: English/Chinese can be switched Test quantity: 4-way charging and discharging measurement Internal resistance measurement: support, use DC two-wire method to test internal resistance Charging function: support, automatic cut-off charging when fully charged (lithium phosphate battery charging is not supported) Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable Automatic charging and discharging: supported. The battery is fully charged at the end of automatic mode Cyclic charging and discharging: supported, 1~9 cycles adjustable (only supported in automatic mode) Status prompt: Supported Cooling mode: fan active cooling Overheat protection: support Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable gears Discharge current: the maximum current is about 1A, which is not adjustable, and does not support independent transformation Charging voltage: controlled by a special battery charging , with a maximum charge of about 1A and a full charge voltage of 4.2V Power-off saving: only save the set parameters, not the measurement data Product size: 150 × one hundred and three × 36mm Package size: 182 × one hundred and twelve × 50mm Data link: https://www.banber.com/gather/6374be9b2ee0e200077ec155 Shipping list: 18650 battery capacity internal resistance tester X1 Crowbar X1

2CH 18650 Lithium Battery Capacity Tester Module

Product features:

The product supports single channel capacity and internal resistance measurement

Supports individual charging and discharging, up to 9 charging and discharging cycles in automatic mode:

11 levels of adjustable stopping and discharging voltage

DC two-wire method for internal resistance testing, switchable between English and Chinese:

Maximum charging and discharging flow is about 1A

Upgrade points:

1. Chinese and English interface adjustable

2. Adjustable 11 levels of stopping and discharging voltage

3. Support 1-9 times automatic cycle

4. Increased completion status indication

5. Charge measurement increased.

6. The new version also supports testing 21700 batteries, with 21700 battery holder, you can achieve DIY transformation

Caution:

Please ensure that the envment is open and uncovered, if you can add a fan to diipate heat, it is better.

In order to ensure that the battery clamps firmly, 18650 battery holders use compact battery holders, suitable for flat-head battery measurement!

Does not support the charging of lithium phosphate batteries

Basic parameters:

Working power supply: DC5V power supply or 18650 battery (need to provide their own)

Applicable battery: meet the stop discharge voltage 2.5 ~ 3.5V, 2.8V start ~ 4.2V full battery are applicable

Power supply interface: Type-C interface, power supply cable s-provided (C-port mobile phone cable)

Systemguage: Chinese (default), English

Number of tests: 1-channel charge and discharge measurement (right-hand battery position only)

Internal resistance measurement: supported, using the DC two-wire method to test internal resistance

Charging function: supported, full automatic cut-off charging (LiFePO4 charging not supported)

Discharge function: supported, automatic stop when conditions are met, discharge current is not adjustable

Automatic charging and discharging: supported, battery is fully charged at the end of automatic mode

Cycle charging and discharging: supported, 1~9 cycles adjustable (only supported in auto mode)

Status indication: supported

Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 levels adjustable

Discharge current: two-way resistor, max. 1A current, not adjustable, does not support independent transformation

Charging voltage: special battery charging control, max. 1A charging, full charge voltage 4.2V

Power failure save: only the setting parameters are saved, not the measurement data

Product weight: 80g (net weight) 120g (including packaging)

Product dimensions: 110 x 88 x 30mm

Package size: 153×100×42mm

Information link: https://www.banber.com/gather/6365d57f9f8cae0007718211.html

Shipping list: 18650 battery capacity tester X1

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.