2 pcs Universal Red TPE Car Shock Absorbers Spring Bumper Power Auto B B+ C D E F Type Springs Bumpers Cushion Rubber er

【Product Material】: High -quty rubber[Suitable model]: 99%of the models can be used[Product weight]: The weight of each model is different.[Applicable]All private cars, busine cars, off -road vehicles, and vans are common.[Product performance]: 1. The use of er principles, shock absorption performance is significantly improved. The shock absorption effect can make the ride comfort of the car one grade, especially reflected in the pits. 2. The stability is significantly improved when the non -asphalt road bumpy road turns. 3. Restrim on the vibration of the body during the driving of the car, thereby reducing the vibration noise during the driving of the car. 4. Properly increase the height of the vehicle body and improve the paing performance of the car pavement obstacles. 5. Protect the shock absorber and suspension system, extend the life of the car shock absorber, and prevent damage to the shock -absorbing spring oil seal caused by exceive bumps.【installation method】:1. Use the jack to push the wheels up and hang out2. Wipe the shock absorption spring with water (wipe multiple times) to ensure the cleaning of the spring, no sand, and gravel, which will reduce the life of the shock absorber.3. Paled soap soaked in the shock -absorbing spring, coated the soap soap in the grooves of the powerful er; wash your hands and install the powerful er into the spring (first install the groove, then install the lower installation You can also install half of the upper and lower grooves first, and then rotate the remaining. Until the spring is all in the groove, the extra part can be cut with a knife).4. Finally, after installation, turn the gap to the middle of the inside, and determine that the spring is in the groove, and you can put down the body.

Note: The weight of each model is different, calculated according to the model of the model.A model:Spring gap: 47mm, spring thickne: 13mm, spring diameter: 173mmModel A weight: 15g, packaging size: 31*19*10cmA+model weight: 1700g, packaging size: 31*19*10cmB model:Spring gap: 35mm, spring thickne: 13mm, spring diameter: 160mmB model weight: 1000g, packaging size: 28*17*7cmB+model weight: 730g, packaging size: 24*15*6cmC size:Spring gap: 27mm, spring thickne: 10mm, spring diameter: 131mmC type weight: 780g, packaging size: 22*15*6cmD model:Spring gap: 23mm, spring thickne: 10mm, spring diameter: 113mmD model weight: 440g, packaging size: 21*14*5cmE size:Spring gap: 15mm, spring thickne: 9mm, spring diameter: 112mmE model weight: 360g, packaging size: 21*14*5cmF version size:Spring gap: 12mm, spring thickne: 15mm, spring diameter: 120mmF model: 400g, packaging size: 21*14*5cm