20-63Mm Ppr Plastic Pipe Welding Machine,Tube Heating Hot Melt Machine Temperature Control Tool for PP/PPR/PB/PE (600W 220V)

(1.) welding connector

(2.) Plastic pipe welding machine

(3.) Quality is excellent and professional. we have the ce certification

(4.) Voltage: 220V±10%,frequency: 50/60Hz;  Component: 20-63mm sockets, screws,

Screwdriver, hexagonal spanners. Using Manual. standing.

(6.) The size of the moulds:20-63mm

Usage

1. Fixed install heating-side welding head, the welding device placed on the shelves, according to specifications required to install the corresponding heating pipe die head, and pull tight with a hex generally small in the preceding paragraph, a large back-end.

2. Switch on the power (note the power supply must be protected with a ground line), according to the corresponding models of the machine to the instruction attention to light changes, until the welding temperature control device to enter the work state, can be started.

3. With vertical cutting device to cut off pipe tube, pipe and fittings will also promote the welding device with no moving within the die, as required for operation. Immediately after the heating time to reach pipes and fittings removed from the die head at the same time, rapidly rotating non-uniform insert directly to the desired depth, to form a uniform flange joints.

Key Features

Intelligent temperature control fuser]: 600W 220V handheld welding machine, thickened anti-scalding cable can reduce safety hazards. The thickened insulating layer can prevent leakage and high temperature, and multiple cooling holes can speed up the cooling rate and extend the service life of the machine.

[Suitable for pipe diameter]: Hand-held welding is equipped with 6 die heads, which can be installed on the machine at the same time, respectively, 20, 25, 32,40,50,63mm, which can be used for welding 6 kinds of size pipes. Basically include pipes of various sizes.

[Digital display screen]: fast heating speed, constant constant temperature, intelligent digital display, adjustable heating plate temperature PPR pipe welding machine is equipped with a digital display screen, which can easily check the temperature.

[Wide range of applications]: 600W 220V digital pipe welder can be used to weld PPR, PB, PE, PV, plastic and other materials. It is suitable to be placed at home, repair shop or construction site.

[Welded pipe]: The pipe cutting machine cuts the pipe with a straight pipe. The pipe and the pipe enter the fuse mold at the same time without rotating, and operate according to the table requirements. After the heating time is reached, the pipe and the pipe are taken out of the mold at the same time, quickly and directly into the required uniform depth, without rotating, so that the seam becomes uniform