220V 80W 3.5M Water 220V 110V Muti-fuctional Submersible for Router 1.5KW 2.2KW ndle Motor Machine Cooling

、

80W 220V/110V Water Flow 3500L/H Hmax 3.5m Dry Run Protetion Muti-fuctional Submersible for ndle Motor, Miniature Foutains, Air-conditioning Fan, Foutain, Aquarium Fish Tank

Product s:

Voltage: AC 220V /110V （optional）

lift: 3.5M / 11.5ft

Power: 80W

ffic: 3500L/H  MAX The maximum spray volume of this water can only be achieved under the pressure removal and the maximum voltage power.

Voltage: 220V~240V/50HZ

Material: ABS + metal

Drive method: Electric

Plug type: CN plug、US plug、EU plug、AU plug、UK plug optional）

Applicable range: cooling 0.8/1.5/2.2kW water-cooling ndle motor

Weight: about1.2KG

Note:

1.Do not idle running the without water,the water mustimmersed in water to use.

2.The product is used for carving machine water ciration for ndle motor cooling, the product is lift 3.5m submersible , the work required is totally not into the tank, tank water level is about 2 times the height of the above can ! Try to avoid anhydrous air operation

3.Cooling water ciration system is mainly used in wood mould machine machine machine machines and other equipment. The external water supplied to the ndle motor tools need to be cooled and then to achieve the desired cooling effect, the cooling system of the large flow high lift can better prothe ndle motor and the tool life, is the auxiliary facilities of machine, equipment standing.This is submersible water pplicable for 0.8/1.5/2.2kW water-cooling ndle motor, machine,marking machine, water fountain, etc.

4. ABS housing has good resistance to heat nd impact, ensuring lifespan of the .

How to use XILAIYUE' 80W 220V Water ?

1. Before using, take the and fix to a suitable outlet, and then connect with the hose.

2. Sucker has a fixed and s cushioning effect, please fix the suckers on the bottom plate when lying flat or adsorbing on the wall.

3. If fixing the with the rope, it is no need to fix the sucker.

It also can used the right sticks, nails to fix the through fixing the holes of bottom plate.

4. After fixing firmly, you can connect with the appropriate power supply, and the start working.

5.This product is installed thermal protection, when the motor is overheating because of abnormal operation, the motor will automatically cut off the power.

6. The casing and all the parts which contact with the outside are using , alkand salt-tolerant material. It can be used in salt, acid, alkand salt environment.

7. This can be used as the amphibious .

8. This product uses a unique design of the motor and body structure, it has characteristics such as lower power consumption, longer life.

9. This product equipped with multe connecting ways. It can connect with tubes of a variety of specifications in kinds of ocns.

10. Do not heated liquids with a temperature higher than 35℃.

11. Please e sure the working in clean water.

About Maintenance:

If the will be not used for long-term, please take the out of the water, and let the work in the clean water for a moment, and then clean the parts of and wipe clean.

If the temperature is below 0℃, please take the water from the water immediately and discharge accumulation of water in the , in case is broken because of freezing.

Before using the , please e sure the rated voltage marked on the nameplate and the voltage of actual use is consistent.

When installing, removing and cleaning the , you must unplug the power plug to ensure safely.

If the has been a serious collision, please chethe , if broken, please stop using immediately.

Not intended to be moved when plued in or in operations.

The power cord of the water cannot be repd. If the power cord is damaged during use, it must not be used any more.

Do not lift the by the power cord.