25KG Adjustable TV Wall Mount Brackets Flat Panel TV Frame Support 15 Degrees Tilt with Level for 14 - 42 Inch LCD LED Monitor

Brand Name : NoEnName_NullModel Number : EPC_HMP_61SOrigin : Mainland ChinaPackage : YesHign-concerned Chemical : None
DescriptionMax Capacity: 25KG / 55.13LBDistance From the Wall: 52MMVESA Standard Pitch: 25 x 45mm， 100x100mm， 200x200mmType: Adjustable TypeUp and Down Tiltable Angle: 15 degreesMaterial: SPHC SteelApplicable Size: 14 - 42 inchesFeatures:- Steel with high hardness and toughness.- Angle adjustable design， the up and down adjustable angle is 15 degrees， choose the most suitable viewing angle.- High-intensity rotating shaft that can withstand multiple rotations without deformation.- Application Scope: Fit for most HDTV flat panel TV， LCD TV， LED TV. Suitable For family， entertainment， public places and commercial places such as living room， KTV， bars， airports， railway stations， bus stations， shopping malls， stores waiting hall， lounge， large conference rooms， classrooms， lobby and restaurants.- Safety screws are set at the bottom， which makes it safer to use.- Suitable for 14*42-inch TV with good versatility.- TV stand， using high temperature baking technology， will not lose paint and rust after long-term use.Colour: BlackInstallation and operation instructions:- 1. Use the wall plate as a templet to drill four holes of 10mm diameter and 50mm depth in the concrete wall. Then wedge four plastic concreteanchors into the holes.- 2. Install the wall plate， Put the wall plate on the wall，and then screw four lag bolts into each plastic concrete anchor through metal washer to four the lag bolt，the plastic concrete anchor and the wall.- 3. Install the monitor brackets onto the back of the panel TV: screw four bolts into the holes in the back of the panel TV Make sure the distance from each bracket to the top of the panel TV is equal，and also as center as possible.The parts shall be selected according to the dimensions of the holes in the back of the panel TV.- 4. Adjust the angel of the LCD between -5°~+5° to a suitable position by hands.Place of Application: 14 - 42 Inch LCD LED MonitorNote:- There are many types of screws available for most TV sets. You only need to choose the right screw from the rack accessories.- When purchasing， please check whether the hole spacing of your TV set is consistent with this product and whether the weight is within the tolerance range of this product.- The quantity of product accessories will be somewhat deviant， but it will not affect installation and usage.Product Weight: 570 G / 20.11 OuncesProduct Dimensions (L*W*H): 285*123*47 MM / 11.22*4.84*1.85 InchesPackage Weight: 760.0 G / 26.81 OuncesPackage Dimensions (L*W*H): 285*123*47 MM / 11.22*4.84*1.85 InchesRetail Packaging: Yes， General BoxPackage includePackage Including:1 x TV Stand1 x Installation Accessories