4 Digits Fuel Flow Meter Large Screen Display 5‑30GPM 2

Feature:

1. The maximum working pressure of the diesel flowmeter is 10Bar, and the burst pressure is 30Bar.
2. Designed to accurately measure the amount of dispensed liquid fuel or lubricant, with a flow rate of 20‑120L/min and a range of 5‑30 GPM.
3. Comes with a large screen display, easy to read, four digits (return to zero), 8 digits (non‑return to zero).
4. The handwheel can be quickly returned to zero manually, the accuracy is +/‑1%, the repeatability is 0.2%, and the operation is very simple.
5. For non‑commercial use only and can be used in high‑viscosity liquid media, diesel, gasoline, kerosene, engine oil and other lubricating oils.
6. Made of high‑quality aluminium alloy and plastic, which has exquisite workmanship and is durable.

Specification:

Item Type: Fuel Flow Meter

Material: ABS+Aluminum Alloy

Flow Range: 5-30 GPM
Flow Rate: 20-120L / min
Accuracy: ±1%
Repeatability: 0.2%
Maximum Working Pressure: 10Bar
Burst Pressure: 30Bar
Nominal Diameter (Caliber): Approx. 1in / 2.5in
Feature
Low Cost
Less Maintenance

The subtotal can be set to zero.

The flowmeter is designed for non-commercial use only.

4 Digits of Diesel Fuel Flow Meter
Used in Diesel, Gasoline, Kerosene.
Easily Reset the Register to Zero.
The Main Accumulator Register 9999.
Model: 4-Digit Flowmeter
Entrance Size: BSPT / Npt 1in
Flow Rate: 20-120L / Min
Metric Accuracy: ±1%
Accumulative Counting Digits: 8 Digits

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}

Package List:

1 x

4 Digits Fuel Flow Meter

Note:

1. During the installation of the oil dipstick, please pay attention to the tightness of the interface. Need to use gaskets or unprocessed taps to improve sealing.2. The flow meter function will be tested before leaving the factory. There may be some oil on the surface of the product. This is normal. Just wipe it clean, it will not affect subsequent use;3. The reason why the oil gauge does not turn: If it is used in water, it will rust and get stuck. 4. A pre‑filter device must be added. The filter needs to be installed in front of the oil inlet, otherwise foreign matter will block the turntable.