433 Mhz Universal Wireless RF E Control Switch Transmitter Receiver With

Specifications:

e control Transmitter

Operating voltage: DC12V (23A/12V battery x1)

Transmitting frequency: 433MHz

En Type: Fixed code

Receiver sensitivity: > -105dB

Transmiion distance : 100M (Open field)

Size: approx 55*28*10mm

Receiver board

Operating voltage: AC 110V - 240V

Output voltage = Operating voltage

Operating frequency: 433MHz(Same with e control)

En Type: learning code(you can buy extra 315MHz e controllers for this receiver)

Rated contact current of relay: 15A/240VAC, 15A/110VAC (Please notice that : Although the relay is marked 30A 240VAC. The 30A is for the peak current of your load. The rated current of your load should le than 15A)

Box size: approx 65 x 45 x 28mm

Instructions:

1. Jog: The e control is controlled by a on. After preing the on, the relay is closed, and when the on is released, the relay is disconnected.

2. S-locking: The e control is controlled by a on. Pre the on once to pull in the relay, and pre it again to disconnect.

3. Interlock: The e control is controlled by two ons. Pre the A on to close the relay, and pre the B on to disconnect.

4. Delay: After the pairing is succeful, the relay will automatically disconnect after 5 seconds/10 seconds/15 seconds/20 seconds.

Learn to code:

1. Jog learning method:

Pre the learning on of the controller once, the indicator light flashes quickly and it is in the learning state, and then pre any on of the e control you want to learn to send a code. At this time, the indicator light flashes three times and goes out, and the code matching is completed.

2. S-locking learning method:

Pre the controller learning on twice, the indicator light flashes twice quickly in the learning state, and then pre any on you want to learn on the e control to send a code. At this time, the indicator light flashes three times and goes out, and the code matching is completed.

3. Interlocking learning method:

Pre the controller learning on three times, the indicator light flashes three times quickly in the learning state, at this time pre the e control A on, the indicator light flashes three times, and then pre the e control B on again, the indicator flashes three times and goes out, and the code matching is completed .

4. Learning method with a 5-second delay:

Pre the controller learning on four times, the indicator light flashes four times and then pre the e control to send a code, the receiver indicator flashes three times and then the learning is succeful, then pre the e control to send the code, the relay will automatically disconnect after 5 seconds of closing.

5. Learning method with a 10-second delay:

Pre the controller learning on five times, the indicator light flashes five times and then pre the e control to send the code, the receiver indicator flashes three times and then the learning is succeful, then pre the e control to send the code, and the relay will automatically disconnect after 10 seconds.

6. Learning method with 15 seconds delay:

Pre the controller learning on six times, the indicator light flashes six times and then pre the e control to send a code, the receiver indicator flashes three times and then the learning is succeful, then pre the e control to send the code, and the relay will automatically disconnect after 15 seconds of closing.

7. Learning method with a delay of 20 seconds:

Pre the controller learning on seven times, the indicator light flashes seven times and then pre the e control to send the code, the receiver indicator flashes three times and then the learning is succeful, then pre the e control to send the code, and the relay will automatically turn off after being closed for 20 seconds.

Clear data:

Pre and hold the learning on for 8 seconds without letting go, the indicator light flashes once until the receiver indicator flashes 6 times quickly, the code clearing is succeful

Item Include:

1 x Wirele reveiver

1 x 2 on e control transmitter

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.