433Mhz Wireless Smart Switch 1/2/3 Gang Rf Receiver Module AC110V 220V Control Home Light Wall Panel Lamp nsmitter

433Mhz Wirele Smart Switch 1/2/3 Gang Rf Receiver Module AC110V 220V Control Home Light Wall Panel Lamp nsmitter 2023

Description:

Product s:

Working voltage: AC 90-250V 50/60Hz

Load current: ≤10A, load power: 1100W

Standby current: 3.6mA～5mA

RF frequency: 433MHz

RF working mode: rheterodyne reception

Receive sensitivity: >97dbm

e control receiving distance: more than 50 meters in open space

De method: MCU de;

Modulation method: ASK (anti-interference, strong nsmiion performance)

The number of e controllers that can be stored: 20

Support e control type: ligent learning type 1527 learning code, 2262 fixed code (customizable rolling code);

Output type: 1-way relay switch signal, with load current le than 10A;

A variety of working modes: jog, s-locking, interlocking, delay off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light-on function when incoming calls;

Working environment: -20～80℃.

Color: black, white

Wiring method: fixed terminal

Output wiring type: neul wire, live wire

Specifications:

About Working mode:

[Jog mode]Pre the e control and do not release the line to power on, release the e control line to disconnect;

[S-locking mode]Pre the e control line to power on, and pre the e control again to disconnect the line;

[Interlomode]Pre one of the ons on the e control (such as the A on), the line is powered on, and then pre another on on the e control (such as the B on) to disconnect;

[Jog delay off mode]Pre the e control line to power on, release the e control to start timing, and automatically disconnect the line after 5 seconds, 10 seconds, 15 seconds, 20 seconds (4th gear);

[The function of turning on the lights for incoming calls]That is, the whole line automatically pulls in after power is supplied, also known as the function of turning on the lights for incoming calls.

Package Included:

1 x 433Mhz Receiver Module，

1 x Feel free to stithe e control

(optional)

Notes:

Precautions:

1. Do not operate with power on, you should turn off the power first to operate, and use it after the test is confirmed.

2. When the voltage of the e control is insufficient, please rep the battery in time (when the voltage of the e control battery is insufficient, the general e control distance becomes closer).