443mhz 4CH Remote Control Duplicator Key Fob

443mhz 4CH Remote Control Duplicator Key Fob Distance Remote Control 433.92MHZ Clone For Garage Door Gate With 12V 27A Battery

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.443mhz 4CH Remote Control Duplicator Key Fob Distance Remote Control 433.92MHZ Clone For Garage Door Gate With 12V 27A BatterySpecifications:Transmission frequency: 433 MHzTransmission distance: 50-100m (open area)Steps1. Clear e and restorePress and hold the two ons above at the same time, make sure that the LED flashes for a while and then goes out and does not let go. After 2 seconds, the LED light starts flashing, which indicates that the e has been cleared. Press and hold the two ons below at the same time, the LED light starts to flash after 3 seconds, which indicates that the e has been restored to the e that was cleared last time.2. CopyTake the remote control in the left hand, and our self-test remote control in the right hand. The two remote controls are as close as possible. Press the corresponding on keys of the two remote controls at the same time, and the LED lights will keep flashing, which indicates that the e of the on keys of the remote control has been learned by our self-test remote control.The other 3 on keys also operate in the same way.3. RecoveryWhen you accidentally clear the e of the self-copying remote control, you can press the following two ons at the same time, the LED light will light up after 3 seconds, and then flash quickly, which indicates that the e of the self-copying remote control has been restored.Note: Before using our self-copying remote control to copy, please be sure to clear the existing e of the self-copying remote control. The following is the method to test whether the existing e of the self-copying remote control has been successfully cleared:Note: The flashing speed of the LED is that when you finish the clearing action, you can press any key of the sub-copy, if the LED flashes once immediately and then goes out, it means that the sub-copy e has been cleared. It is determined by the launch oscillation resistance of the remote control!Package includes:1 * 433MHz remote control

window.adminAccountId=2673002718;