4S 40A 3S 40A 60A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board With Balance For Drill Motor Lipo Cell Module

Package : TQFPis_customized : YesModel Number : 4S 40A Li-ion Lithium BatteryOperating Temperature : -40+85Dissipation Power : 4S 40A 3S 40A 60A 6S 15ASupply Voltage : 16.8V 18.1V 14.8V 12.6VApplication : ComputerCondition : NewType : Voltage RegulatorBrand Name : diymore : Mainland ChinaElectronic products : For Arduino STMEnhance/Balance : Li-ion 40A 18650-BMSBMS Protection Board : Lipo Module18650 Charger Drill-Motor : BalanceLithium-Battery-Charger : Protection Board Drill Motor
 
 
 
4S 40A 3S 40A 60A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance for Drill Motor Lipo Cell Module
 
4S 40A Balance Version/Enhance Version
Description:
 
4S 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
 
 Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery)
 
 Charging voltage: 16.8V - 18.1V
 
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
 
 Continuous charge current (upper limit): 20A
 
Enhanced version: suitable for electric drill with starting current below 80A and power below 180W .(without balanced function)
 
Balanced version: suitable for electric drill with starting current below 80A and power below 230W .(with balanced charging function)
 
Note 1: To successful starting the drill requires three 15C-20C power batteries, or eight 10C-15C power batteries (ordinary 18650 battery can not start the drill!!).
 
 Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, plese do it strictly according to the wiring diagram. Do not deliberately make it short circuit.
 
 
Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.
 
Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
3S 40A Balance Version/Enhance Version
 
Description:
 
3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
 
Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery)
 
Product Size: 41 * 55 * 3.4mm (Enhanced Version), 41 * 60 * 3.4mm (Balanced version)
 
Product weight: 8.8g (enhanced version), 9.8g (balanced version)
 
Charging voltage: 12.6V - 13.6V
 
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current )
 
Continuous charge current (upper limit): 20A
 
 
Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function)
 
Balanced version: Suitable for electric drill with starting current below 80A and power below 170W .(with balanced charging function)
 
 
 
Note 1: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!!).
 
Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, please do it strictly according to the wiring diagram.Do not deliberately make it short circuit.
 
Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.
 
 
Note 4: Do not use a mix of good battery and poor battery,please make sure each battery is the same in capacity and internal resistance.
 
For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery +1 Poor battery use effect = 3 poor battery use effect).
3S 60A Balance Version/Enhance Version
 
Scope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)
Continuous charge current (upper limit): 15A
Enhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)
Balanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)Note 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, plese do it strictly according to the wiring diagram. Do not deliberately make it short circuit.Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.
6S 15A 24V
Specification:
 

Size: approx.50*30*2mm
Lampshift maximum discharge current: 15A
Instantaneous discharge current: 25A
Charging voltage: 25.5V
Charging current: 15A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release condition: Disconnect the load
Short circuit detection delay: 250uS
Short circuit protection Release condition: disconnect negative open
Main circuit conduction resistance: ≤20mΩ
Working current: ≤30uA
Sleep current (battery over discharge) ≤10uA
Temperature range: -30 / + 80 °
 
Feature:
 
Fine workmanship and durable.
For the rechargeable (generally refers to the lithium battery) from the protection of the integrated circuit board. Lithium battery (rechargeable type) so need protection. 
As the lithium battery itself determines the material itself can not be overcharge, over discharge, overcurrent, short circuit and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow a protective resistor with a sampling resistor and a current fuse.
 
Note:
 
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.











?width=233&height=312&hash=545,