5M RGB Led Flexible Strip/ Snake Light Kit With Remote Controller & Power Supply

RGB Light Strip with Remote Controller

This 12V Color Changing RGB Led Light Strip Kit, with IR Remote Controller, Control Box and Power plug uses super brightness SMD LED as their light source. It comes inclusive of all components necessary to setup and light up your home, office and or outdoors.
The light strips are very flexible and can be fixed on even and uneven surfaces. Being LED lights, they consume very low power and can also be used for lighting/illumination around transparent or non-transparent material. 
    The strip lights can be safely mounted using 3M double side adhesive on the back for pasting against your preferred surfaces. 
LED Strip lights are suitable for home, office and indoor and outdoor lighting including:-

• Christmas Lighting and Other Decoraive or Seasonal Parties/Festivities
• Architectural decorative lighting. 
• Archway, canopy and bridge edge lighting. 
• Amusement park, theater and aircraft cabin mood lighting. 
• Emergency hallway lighting. 
• Auditorium walkway lighting. 
• Stairway accent lighting. 
• Concealed lighting. 
• Back lighting for signage letters. 
• Channel letter lighting. 
• Emergency exit path lighting. 
• Edge-lit acrylic panel lighting.

LED Strip Light Features:

LED type: SMD 2835
The color: RGB (respectively by the red, green, blue)
LED quantity: 60 leds / meter
Packing: 5m / roll
Work of input voltage: 12V DC
Working power: 4.8W / M
Operating current / 5mA: 2A (total 5A or more)
Luminous flux: 800-900 lumens / m
Protection class: (not waterproof)
Size: 500 x 0.8 x 0.25cm
Working temperature: -20 to 50 deg;
Drive mode: the relative voltage (DC 12V voltage)
PCB Background: White

Remote Controller Features:

1.The remote allows you to adjust brightness, customize light, color and set fade in/out and flash rate
2. 16 colors (Note: For 3528 light strip, except red, blue, green button shows pure light, other color buttons and white button works as multicolor mode instead of pure color),6 DIY keys,8 light pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change/ 3 color jumpy change/ RGB increase and decrease control
3. Other tri-color, common anode LEDs may be used if configured to work with 12V DC supply voltage by means of voltage dropping resistors
4. IR remote controller uses a CR2025 battery and requires a 12V DC power supply