5V 1A Micro USB Type-c Lithium Battery Charging Board Charger Module+Protection Dual Functions TP4056 18650 For Arduino

Package : SOPis_customized : YesModel Number : 5V 1A Micro USB Type-C Charging BoardOperating Temperature : 5V 1A Micro USB Type-C Charging BoardDissipation Power : 5V 1A Micro USB Type-C Charging BoardSupply Voltage : 5V 1A Micro USB Type-C Charging BoardApplication : Electric ToyCondition : NewType : Voltage RegulatorBrand Name : diymore : Mainland China
5V 1A Micro USB Type-C 18650 Lithium Li-ion Battery Charging Board TC4056A TP4056 With Protection Functions PCB For Arduino DIY?TP4056 Mini USB??1. Charge module- Linear charging.?2. Current- 1A adjustable.?3. Charge precision- 1.5%.?4. Input voltage- 4.5V-5.5V.?5. Full charge voltage- 4.2V.?6. Led indicator- red is charging blue is full charged.?7. Input interface- mini USB.?8. Work temperature- -10° to +85°.?9. Inversed polarity- NO.?10.Size- small to 25X19X10mm.??NOTE:?Ampere meter can only be connected to 5v input end of the module.?It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.?The connection wire should not be too thick.?Make sure the connect point is good.?If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.?NO Reveral polarity??TP4056 Micro USB??1. Feature?1). High quality charging Chip TP4056, simple circuit, good protective value, high charging precision.?2). Complete mechanical automation processing, High reliability.?3). Automaticlly adjust the output current from 100 to 1000ma by simply changing the fixed resistor on the circuit board.??2. Application?It can be used to charge for one pcs of lithium battery or serval parallel lithium batteries.??3. Parameter?Input Voltage: 4.5~5.5V?Full charging voltage: 4.2V?Max output current:1A?Power Indicator: Red stands for charging, Green stands for fullly charged.?Input interface: Micro interface?Item Size: 25mm*19mm.??5. Notes:?1). The Ampere meter can only be connected to 5v input port of the module.?2). It is better that the charging current is 37% of the battery capacity. For example, the charging current should be 400 for the 1000mAH battery.?3). The connection wire should not be too thick.?4). Make sure the connect point is good.?5). If the input voltage is too high, For example 5.2V or even 5.5V, then the charging current will be less than 1000mA, it is normal. When the voltage is too high, the chip will automatically reduce the charging current to protect the chip from burnning damage. Besides, it is normal that the chip feel hot when the working temperature of the chip is around 60°.??TC4056A Micro USB protection?100% and high quality?Charge module- Linear charging.?Current- 1A adjustable.?Charge precision- 1.5%.?Input voltage- 4.5V-5.5V.?Full charge voltage- 4.2V.?Led indicator- red is charging Green is full charged.?Input interface- micro USB.?Work temperature- -10° to +85°.?Inversed polarity- NO.?Size- small to 25X19X10mm.??Package include:?1 x Battery Charging Board