60MM BlaFace Car Turbo Boost 3 BAR With White &Amber Lighting turbo boost meter Auto /Car Meter TT101246

60MM BlaFace Car Turbo Boost 3 BAR With White &Amber Lighting turbo boost meter /Car Meter TT101477

Product Description:

Condition:100% New with orginal Dynoracing pack.With high speed ster motor ,give you a quiresponse.Two installation methods according to your preference.Power:DC 12V Profeional.Diameter:2.5"/60mm.Unit: BARBacklight:White/Amber(you can change it by yours by wiring)Universal fit for: All car models with 12V power.6 Months WarrantyNote:Easy Installation With Users Manual In English,Profeional installation is Highly Recommended.Package include:1*Boost 3BAR1*Boost r1*Vacuum 1*T Joint1*Screw Knob2*Cables1* Holder and mounting acceories1*Dynoracing packQuestion and solution（Please connect the boost r for subsequent setup）:1:How to cancel the buzzing sound?If you want to cancel the buzzing sound, just restart the power supply and hold the on until the buzzing sound disappears, then release the on. Vice versa.2:How to set the PEAK ValueAfter completing the S-checking, pre the on and release, the PEAK lights up (blue light). Then hold the on again for 3 seconds, when the PEAK light fes, release the on, PEAK value is cleared, the pointer will returns to zero after about 3 seconds.2:How to set alarm points and cylinder:After s-examination, hold the on for 5 seconds, the pointer lights flicker, loosen, and then pre the on to set the alarm point (Pre the on continuously and fleetly for fine setting, pre and hold the on continuously for quisetting). After about 5 seconds, the pointer automatically returns to zero, you can then set the next Step.After s-test or after the pointer returns to zero, hold the on for 10 seconds, the pointer lights flicker, loosen, and then pre the on to set the cylinder, loosen, after 5 seconds, the pointer automatically returns to zero, you can set the next step.When the meter reaches the alarm value, the lights will flicker continuously.