7.4V Audio Motherboard 20W Power Amplifier Board With Bluet Ooth Recor

Detailed Information About The Product:

The bluet ooth pull rod power amplifier board is suitable for the use or modification of the pull rod or a single sound. It also has microphone socket USB card bluet ooth radio recording Chinese voice broadcasting microphone priority external aux interface and other functions. It can read MP3 WAV and wma in the TF Card and USB flash disk sampling rate 8 - 48K / code rate 8 - 320kbps / bit width 16bits music files
Use charging: 9V / 2A charging source plug specification 4.0 * 1.7 small head red light and green light flash alternately during charging. After full charging the red light goes out and the green light goes on; Note: if your charger is inconsistent with this data it is recommended to buy the package with charging source
Recording instructions: you need to insert a U or TF card. The recording time depends on the memory capacity of the u or TF Card. 1. In music mode briefly press rec to switch to MIC recording mode and rec is displayed on the screen; At this time briefly press rec to start recording the recording time is displayed on the screen and the recording equipment flag flashes. 2. In linein and FM mode short press rec key to record directly
During recording: Short press rec to stop recording and automatically play the newly recorded file. After playing return to the current mode interface and short press rec again to record another file; Briefly press play to pause / resume recording; Briefly press the mode key to stop and save the recording and return to the current mode interface; In the current mode interface briefly press rec to record the ne xt recording
To play a recording file: 1. Recording file switching: in music mode long press rec to switch MP3 files and recording files. 2. Delete file: in music mode pause the track be ing played long press the mode key to delete the current file del is displayed on the screen and the ne xt track will be played automatically after deletion

Microphone priority key:
1. In the radio / aux / MP3 mode briefly press the microphone priority bu tton and the nixie tube will flash. At this time shout into the microphone to listen to the sound in the radio / aux / MP3 mode
It will stop. After about two seconds the sound in radio / aux / MP3 mode will return to normal;
2. In the microphone priority mode briefly press the microphone priority bu tton and the nixie tube will flash twice. At this time the microphone priority function is cancelled
Product parameters:
Power: 20W
Peak: 35W
Use charging: dc9v above 2a charger only supports lithium battery charging * does not support lead-acid battery charging!
Use lithium battery: 7.4v 3a - 6a lithium battery which needs to be connected in the machine! Or external DC12V / 3A - 5A power supply!
Horn used: 4 ohm / 6-8 inches / 60-100 magnetic / 20w-80w
Panel size: length 188mm width 63mm depth 36mm total depth 52mm including swivel cap
Installation hole spacing: 178mm long on both sides and 52mm wide on both sides
Installation opening: 163mm long and 46mm wide
Weight: 0.14kg
colour:Black
Material:plastic

Package Contents:
1 x Audio Motherboard

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !