915 Generation DC12V XH-W1219 Switch Regulator Sensor Module Temperature Co

Module: XH-W1219
Function: Temperature Controller
Power Supply: DC12V and High Quality pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.
Short press button SET: If you the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. wait 5s after your setting date, the module will save the date you have set after 5s.
Long press button SET: if you the parameter setting mode. There are two group parameter for : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could set the timing mode by the button+ and button-.
P0--0: timing mode is 0--999 seconds; P0--1: timing mode is 0--999 minutes; P0--2: timing when the pattern is 0--999; P1--0: T1 time delay relay (T1 timer); P1--1: T1 delay time relay releases (T1 timer)
P1--2: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timing) ends.
P1--3: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timing) ends.
P1--4: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timer), repeat the .
P1--5: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timer), repeat the .
Colour: green
Material: plastic
Size: 60x44mm Package Contents:
1 * Sensor Module
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.