Adjustable Saddle Seat For Nineboot KickScooter ES1 ES2

Feature:
1. 100kg strong load bearing capacity, more stable and reliable for your ride.
2. The saddle is made of high-quality elastic foam sponge, which is soft, elastic, breathable and comfortable to use.
3. Adjustable height, can fit for different people's needs.
4. No require of drilling, convenient to assemble and disassemble.
5. Suitable for Nineboot KickScooter ES1 ES2 ES3 ES4.
Specification:
Condition:100% Brand New
Material: Steel + aluminum alloy
Color: As Pictures Shown
Size: Approx.Adjustable height: 51-63cm
Maximum load: 100 kg
Buffer material: high elastic sponge/vacuum plastic
Weight: Approx.2736g

Package List:
1 x Electric Scooter Seat
1 x Wrench
4 x Screws
4 x
Gaskets
4 x Spring
Gaskets
1 x Hex wrench
1 x Turner
1 x Seat Tube
1 x Seat Base
2 x Top Cover of Folding Boxes
How to install?
1. Place the base, open the seat tube of the collapsible base, lock the collapsible box and release it quickly (press and hold the collapsible lock column, loosen the upper cover of the collapsible box and release it, and then lock the quick release), and put the base on the back of the pedal of the scooter.
2. Locking screw, first, place two plastic locking blocks between the bottom plate and the scooter body, insert hexagon screws into the mounting holes one by one, and pretighten. Each screw is pretightened 8 times to hold the plastic lock block. Then tighten the screws one by one until they lock.
3. Install shock seat tube and cushion kit: open and release the quick release kit, insert shock seat tube and cushion kit and adjust to the appropriate height, lock the quick release kit. Adjust the height without exposing the safety cut line on the shock absorber.
4. Adjust seat cushion: adjust the seat cushion to use state and tighten. If necessary, turn the tumbler on the seat cushion kit, turning it over and retracting. Before riding, check whether the cushion is tightened. If loose, use an hex wrench to lock the hex nut on the tiller.
Note:
Please note that there is no need to make holes for the installation. The seat of the scooter is specially designed for the scooter and can be installed without damaging the scooter.
.