This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
Shipped from abroad
Easy Return, Quick Refund.Details
suiguohenmang
New Seller
Be the first to follow
This seller does not have enough history for us to evaluate his performance yet
Brand name: ADT-LINK
Product name: USB 3.0 Type-cmale/female to Micro-B male flat cable (Support OTG)
Product model: UTW3-MM/FM-OTG-13P series
Transfer speed: USB3.0 Standard 5Gbps high speed
Wire length: 3~300 cm, the length can be customized,
Current capacity: 1.5 within 50cm ; 0.9A within 1 meter Product application: GPS navigator, hard disk, Camera, ROCK Pi 4 Raspberry Pi MCU development board, built-in USB device to extend the use of adapter, convenient for brushle pan/tilt, USB power supply and camera video transmiion of handheld pan/tilt, etc. Note:This product is designed to be connected to built-in USB devices, and is not suitable for general external use. Itsupports OTG external use. If you need regular type(don't support OTG type), you can place an order at below link: https://www.aliexpre.com/item/3256804436202813.html?gatewayAdapt=4itemAdapt
ADT USB series Part-Number Description:
S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E
Cable length Description:
The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.
Note 1: (Master) means connecting to the host port,such as motherboard; (slave) means connecting to devices such as U Disk, Card Reader, Hard Disk Case,etc Note 2:Only supports OTG external use. Note 3: What is the difference between product model T4A/T5A/T5T and T4B/T5B? T4A/T5A/T5T with , supports USB3.1 positive and negative plug, both are 10G high speed T4B/T5B does not have a , and also supports positive and negative insertion. The positive insertion can support USB 3.1 high speed but the reverse insertion only supports USB 2.0 low speed
Product Image:
Product real shot:
Summary of technical iues:
1. Can wires and PCB connectors be split?
No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.
2. Cable thickne? Can it be bent?
The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.
3. Is there any EMI shieldingfor Cable?
No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
This product has no ratings yet.