Analog TDS Sensor Water Testing Meter Conductivity Quality M

Description:
1. Plug and play, have humanized design, easy to install, convenient to use and operate.
2. Can be used to measure the TDS value of water, reflecting the cleanliness of the water.
3. The electrodes can measure conductive substances, such as suspended solids in water, heavy metals and conductive ions.
4. The module has four 3.2mm fixing holes for easy installation on any other equipment.
5. Small in size and light in weight, convenient to carry and use at any time, very convenient and practical.


Specifications:
Item Type: Analog TDS Sensor
Input Voltage: DC 3.3 - 5.5V
Output Voltage: 0-2.3V
Working Current: 3-6mA
TDS Measurement Range: 0-1000ppm
TDS Measurement Accuracy: ±10%FS (25℃)
Module Interface: XH2.54-3P
Electrode Interface: XH2.54-2P
TDS Probe:
Number of Needles: 2
Total Length: Approx. 83cm / 32.7in
Connection Interface: XH2.54-2P
Color: White
Other: Waterproof probe
TDS (Total Dissolved Solids) indicates how many milligrams of soluble solids are dissolved in one liter of water. Generally speaking, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the water.
Measuring the TDS value in water is to measure the total amount of various organic or inorganic substances dissolved in the water, in ppm or milligrams per liter (mg/l)..


Package list::
1 x
Analog TDS Sensor1 x Probe1 x Sensor Line
Note:
Plug and play, and does not require too many operating steps.