Arcade Control Panel 5Pin + 10 x LED Push on + USB Board To Raspberry Pi Retropie 3 Model B Project DIY kit

This is a LED Arcade Game DIY Parts for 2 Player DIY Project.

The support all the windows syst!

All the ons are not metal.

If the LED does not light. Then please exchange the location LED interface.

Each player has its own USB cable to e sure that Multayer can play the games in the same condition!

The is a 8 way profeional !

The ons are 5V Full Colors LED Illuminated push ons with build-in Microswitches inside.

The default ons as lighted all the time.

If you purchase one of this it, what will included in the package

1x Zero Delay LED USB

1x USB Cable

1x 5Pin wires for

10x 3Pin wires for LED Push on

1x5Pin 8 way

1x 1 Player 30MM 5V LED Push ons () With LED Lamp and Micro Switch

1x Coin 30MM 5V LED Push ons () With LED Lamp and Micro Switch

8x 30MM 5V LED Push ons With LED and Micro Switch

1x Instruction

on wiring method

Please note:

LEDs distinguish between positive and negative.

If the LED is not lit. Please rep the LED cable interface location.

However, pay attention to the direction of the LEDs. When connected, I inverted 75% of the LEDs that were installed upside down.

Everything is fine by removing them and turning them over.

Can rep the different bal

t's hight quality 5Pin 8-ways model. The service life reaches clicks.New interface mode. Reject the wrong interface.

bottom

Applicable to the wooden shell and shellhine, the return of ible, more wear-resistant; base parallel cone; square gate

Specification map

All the sier conduction point, contact sensitive; within the bar for the stainle steel; 2.0 thickne of the electrolytic plate; dust washers; ball detachable, can rep the different ball;

Push ons

1 Player 2 Player + 2x Coin ons

Individually independent stickers.ons can be opened separately to add brand LOGO. Create your own style.Each on has 2 switch interfaces and 2 LED light connectors.

High quality material manufacturingHigh temperature resistant plastic partsHD nslucent on body & coverRotary design

Comes with lighting effects, can be used for wood console, metal panels, with the use of various types of animation gamePlucked gold-plated, gold-plated contacts, micro-sound, long life, test life of up to 10 million timesUse voltage: 5V

USB Controllers

USB

The USB Cable: 87InchThe 5Pin Cable: 7.9 InchThe ons Cable: 7.9 InSB ed SMD components. Work more smoothly. Longer life expectancy. Lower energy consumption.

on wiring

The LED distinguishes between positive and negative.If the LED is not lit. Please exchange the LED cable interface location.

Board

USB Print TerminalsK1-K12 Push ons Terminals5Pin Terminals2Pin TerminalsAuto, Turbo, Clecet, Mode Terminals6 and 6-1 is Output 5V Power Terminals