Description:Suitable for: Suitable for ordinary fuels, such as unleaded gasoline, fuel oilFunction: Keeping the 496-5 filter clean in your vehicle can reduce damage to the engine and other fuel delivery components. 30 microns, providing high flows rate and excellent filtration efficiency, protecting fuel from particles such as rust, sand, dirt, and water.With protective film: to prevent damage or deformation of the filter element under pressure.Features: Marked with 1 "NPT fittings for inlet and outlet at the top of the cover.Other: By using the 495-4 fuel tank filter cup, the fuel flows can be easily and intuitively monitored. When you need to replace the filter element, the fuel flows will slow down. The bottom is equipped with a drainage valve for drainage.Specification:Material: MetalColor: As shown.Fuel filter element: 30 microns with protective filmHeight: 9.5inchInlet/outlet size: 1 inch NPTTransparent bowl with drain valveFlows rate: maximum 25 gpmWorking pressure: up to 150 psiGravity flows rate: approximately 5 gpmNote:Installation:1. Connect the filter top cover to the tank valve at the opening marked "IN".2. Connect the hose and nozzle to the filter opening marked "OUT".3. When installing the filter element and filter cup, apply a layer of oil on each side of the gasket.4. These components can only be tightened by hand. Tightening the filter cup too tightly can make it difficult to disassemble in the future.5. After assembly, check for any leaks.Package Includes:1 Piece Filter.
window.adminAccountId=229671940;