Cable (Jater) SC-APC/SC-APC Simplex Monomode G657A2 3 mm - 2m

Cable (dark) SC-APC/SC-APC Simplex Monomode G657A2 3 mm optic fiber - 2m

Description

The singlex optical jumper with monomode fiber G657A2 is composed of a sheath with a SC-APC plug assembled on each end to allow the mixing of the equipment of your installation. This optical cord is 3 mm of diameter and 2 meters in length.

- Monomodic fiber 9/125 microns

- Connectors: SC-APC

- Outdoor sheath LS-H-FR

- Dimension of cord: 3 mm

- Cord colour: yellow

Technical description

This optical jumper is used for installations in equipment indoors within the FT.TH, FTTO and Data Center networks.

The singlex jumper SC-APC/SC-APC monomode G657A2 consists of a sheath with a single fiber optic strand of 125 microns sheathed in 900 microns. She carries a light signal in a single mode at the center of the core. For the long-distance transmissions, this type of jumper is optimal.

A SC (Subscriber Connector) plug is connected to each end of the cable and is equipped with the “PULL-PUSH” (Push-pulse) technology, which has the advantage to guarantee a good attachment in the equipment. It has a short sleeve. and a green plastic body and a ceramic ferrule making a dimension 2.5 mm.

The polishing of the ferrule is of the Angled Physical Contact Connector (APC) type. i.e. the surface of the ferrule is polished in convex form with a angle inclined by 8 degrees with respect to the perpendicular of the fiber. Through the inclination of the ferrule, the SC-APC jumpers have a performance level higher. They are therefore optimized for applications which require a high precision.

Installation of SC-APC/SC-APC optical cords:

SC-APC/SC-APC singlex jumpers with monomode fiber G657A2 are essential components for reliable, fast and easy deployment of FT.TH (Fiber To The Home) networks, FTTO (Fiber To the Home) network up to the office) and for the Data Center (DC) architecture.

For the FT.TH network, the SC-APC/SC-APC optical cords are installed in the optical drawers present in the optical distributors (inside and outside) within the NRO, SRO and Mutualisation Point. These jumpers optical systems make it possible to connect a subscriber to the Internet operator to the fibre which it has subscribed to.

In FTTO, SC-APC/SC-APC optical jumpers plug into the optical drawers which are present in the technical bays at the input of building. They ensure the connection of the optical fibre between the operator Internet and the private network.

In the Data Centers, these simplex optical cords are found in three different locations:

- - In the Meet-Me Room (MMR): the optical cords connect in the optical drawers which are installed in the optical splitters (simple or double). They shall ensure the connection between the operating farms to those of distribution.

- - In the mixing area: they fit into the optical drawers sliding metal, present in the mixing racks for making the connection servers and other equipment.

- - In the server room or IT room: these optical jumpers are put on place and use in the same way as in the brewing area. They are installed in the optical drawers, within the brewing racks, for make it possible to make the link between the servers and other equipment.

The LS-H-FR cord:

A LS-H (Low Smoke 'ero Halogen) cordon (FR) offers a safety for equipment and humans, in the event of fire or fire equipment.

This cord delays the propagation of the flames, emits low fumes and toxic gases.

The benefits of SC fiches:

The SC (Subscriber Connector) plugs are the most insecure, they parts of market standards. They are robust and have a ferrule of 2.5. mm of quality ceramic.

The plug emits a noise which is audible when inserted into the connector. This makes it possible to guarantee its proper installation and attachment.

The advantages of optical fibre:

Optical fiber is a glass wire in which a light signal passes in a mode (monomode) or in several modes (multimode). It will make it possible to transmit data and information at very high speeds without encounter disturbances. The connection is much faster and high quality in relation to the copper network, which provides businesses and special of comfortable navigations.

The advantages in a few respects:

- - High information throughput

- - Long-distance transport

- - No loss of performance

- - No grounding problem

- - Immunity against electromagnetic disturbances

- - No crosstalk

- - Discretion of the link

- - Reliability of installations