Camera Timer Wireless Shutter Release E Control For Sony A6500 6300 A6000 A5000 HX50V HX90V RX1RII HX99 A77II A99

AODE WTR-2 will work as a and e shutter release. Besides the full functions of shutter release, it also features multy functions: delay , long exposure , interval as well as setting for the number of exposure; its timing setting can be accurate to 0.1 seconds. The WTR-2 is great for time-lapse recording of blooming flowers, astrophotography and etc.

Compatible With:

For wired and wirele e control

It includes a and a Receiver, can work as a intervalmeter and a wirele shutter release .

4 shutter release mode

Single shooting, 2 second delay modes, continuous shooting, bulb exposure and are available.

5 setting for shooting

>> Delay: A s before a photo is taken >> Long exposure: A Programmable long exposure for cameras B Bulb Mode >> Interval: the interval time between every shoots >> Number: Set the number of exposures time (set to '- -' being unlimited times) >> BKLN: When the BKLN mode is turn on, it allows a group of photos to be taken at automatically exponentially changing exposure time

The exposure time can be accurate to 0.1 seconds (minimum intervl time is fixed to 1 sec.)

You can program delay exposure, long exposure, interval, exposure number function together to capture the beautiful moments with repeat interval time and repeat times shooting

With BKLN function, you can set the exposure time and number, then the camera shoot a group of photos at automatically exponentially changing exposure time.

How to operate

Pre MODE on to switch over S ( Single shooting ), C ( continuous shooting ), B ( bulb exposure ), 2s ( 2 second delay modes ) and Mode. When jump to ( mode), pre left and right on swith over Delay (Delay exposure), Long (long exposure) ,INTVL (interval), N (number), BKLN. Pre SET on jump into the submenu/Confirm, you can change the number by preing the Up on and the down on.

Specification

Frequency: 2.4 GHz Range: 60m+ (open space without interference) Working voltage: 3.0 V Standby : 48 Hours Batteries: 2 x AAA batteries Size: nsmitter: Approx. 130 x 46 x 22 mm (5.1 x 1.8 x 0.9 in), Receiver: Approx. 85 x 37 x 31 mm (3.3 x 1.5 x 1.2 in) Weight: nsmitter: Approx. 56.5g (2.0 oz) (without batteries), Receiver: Approx. 37.5 g (1.3 oz) (without batteries)

Package Included:

1 X wirele e control 1 X wirele e control receiver 1 X Connecting cables for Sony (as you choose) 2 X yard sling 1 X Instruction manual Note: 1.A nsmitter can control multe receivers simultaneously. A receiver can receive signal from one nsmitter only. 2.The "cold shoe" just to hold it conveniently--no electronic connection.

Company Information:

>> Our team was founded in 2007. Production, Research and Sales, we currently have three companies, Shenzhen Fudasi Technology Co., Ltd. (Manufacture, busine and etc.) Shenzhen Aode Technology Co., Ltd. (Research and Development) Shenzhen Integrity ding Co., Ltd. (Sales), approx 150 staffs in total(including Production Staff), has the area of approx 4000 square meters； >> We have 10 years experience for camera acceories, our main product flash trigger, wirele e shutter control and release cable, battery pack. Provide OEM and ODM, our product hot sell all over the world, we focus on research, quality and provide customer the best service.

FAQ

Q: Who We Are? A: We are AODE Store. Our vision is to become the profeional camera acceories manufacturer and seller,and offer an unbeatable shopping experience, prompt shipping and exceptional customer service that exceeds expectation.

Q: When you pre the shutter on on nsmitter, the Receiver's light doesn't change to red and do not respond to nsmitter, that means it hasn't received the signal from the nsmitter. Please follow the below steps to set the Smart Code A: 1. Turn on the nsmitter and receiver. 2. a -like object to pre into the code setting on on receiver, which will ca the LED on receiver to flash red and green light alternately for 25s. Pre the shutter on on nsmitter to reset the code during the code setting mode. When the code is succefully set, the LED on receiver will get back to normal mode, flashing green light. Normally, the frequency of nsmitter and receiver will be pre-set in production. You can the instantly.

Q:Can you became our reseller? A:Yes,you can contact me to become our wholeseller,reseller,OEM customer, ODM customer, or drop-shipping seller. Bulk order, lower price. Welcome to send inquiry to get wholesale price!!!

Q: About Product A: All products are 100% that will be fully d before shipment.

Q: About Feedback A: We regard cusotmers as our friends. We hope you can shop from us with more happine and le worry. Please do not forget to leave us 5-Star feedback. Then you can contact our customer service to get a surprise gift.

About shipping
Shipping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, aess and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neul Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the nsaction.