Car Air Pump Tyre Inflator 150 PSI 12V

Features:

• 1. This machine is suitable for 12V car tires,
• 2. Also suitable for motorcycles, bicycles, ball games, rubber boats, beach floating beds, inflatable toys, etc.
• 3. It can be used as a first aid when the tire suddenly leaks or the tire suddenly leaks on the highway, outdoors, or when going to work in the morning.
• 4. Correct tire pressure in car tires can ensure driving safety and save gasoline. It can be used with the car just in case and has endless uses.
• 5. Equipped with a complete set of inflating nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls, and many other uses.

Instructions for use:

• 1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated. Continue to tighten the air nozzle. At this time, the air will no longer leak.
• 2. Inside the DC12V cigarette lighter
• 3. When inflating, the instrument pointer rises with the degree of tire saturation. When the pointer reaches the appropriate tire pressure (general car tire pressure is 223kpa=35PSI), take out the plug and valve, and the work is completed.
• 4. Please use the professional ball needle and plastic connector equipped with this machine to connect it to the air nozzle to inflate balls and other air-demanding equipment.

Precautions:

• 1. Do not use it to inflate the tires of large and overweight vehicles, such as trucks, large trucks, box-type containers, etc.;
• 2. Please start the car engine to increase the power when using it, and do not consume the car battery power;
• 3. This machine is limited to DC (DC12V) power supply and cannot use household high-voltage AC (AC220V) power supply;
• 4. When inflating, please stop the machine for 10 minutes for cooling after 10 minutes of continuous operation to prevent damage to the air pump and accessories, and to extend the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
• 5. When a normal tire is inflated, it takes about 3-5 minutes to reach the normal tire pressure of 30 PSI. For large tires, it will take a little longer. If the pointer of the instrument rises quickly to 50-100 PSI when starting to inflate, it means that the air is blocked. , there is no air in the tire. At this time, you need to unplug the air nozzle connector immediately and re-operate, otherwise the motor and instrument will be easily damaged.
• 6. Do not leave the machine when using it. Pay attention to the tire pressure at all times and do not oversaturate it;
• 7. After using this machine, the air nozzle wrench must be straightened to avoid fatigue of the elasticity of the rubber inside;
• 8. There is a fuse built into the plug of this air pump. If the air pump does not start, please open the plug, check and replace it (the fuse is 10A);
• 9. This machine should be avoided from being dropped heavily and invaded by sand and mud, and should be kept away from children playing with it to avoid damage;
• 10. Each type of tire requires different pressure. Please refer to the marking on the side of the car tire or ask the car manufacturer.