Car Blind Spot Monitoring System Ultrasonic R Distanceiste Changing Tool Blind Spot Mirror

Car Blind Spot Monitoring System Ultrasonic r Distance Aiste Changing Tool Blind Spot Mirror Detection System

Features:

1. [Blind Spot Detection System] There is a blind spot at the rear of the vehicle, which is likely to endanger driving safety! The system is a vehicle auxiliary device that helps the driver to safely changees during driving.2. [Working principle] With the help of 58GHz microwave r, detect whether there is a moving object on the side/back of the vehicle entering the blind area of the detection area.3. [Detection range] Lateral distance: 0.3m-5m (0.98ft-13.1ft); backside distance: 0.3m-10m (0.98ft-32.8ft). When the system is turned on, the system will begin to detect objects in the blind zone 10 x 50 feet behind the vehicle.4. [Safety protection] When you install BSM on your car, whether it is daytime, night or even snow, as long as there is a moving object entering from the rear of the car, you can get the warning LED light, flashing, and buzzer sound This allows the driver to be cautious when changinges to avoid the poibility of a side collision accident.5. [What will you get] You will receive 1 x control box, 2 x ultrasonic rs, 2 x blind spot monitors (or LED lights), 1 x main wiring harne with buzzer. This is a DIY product, it is recommended to be installed by profeionals. We believe that you will be impreed by our durable and high-quality products!illustrate:Ultrasonic blind spot monitoring system detects the to eliminate the "blind zone" by installing two probes on the rearper of the car to detect vehicle speed signals. The system analyzes and procees the transmitted signals to understand the distance, speed, and moving direction of the vehicle behind.Through the system algorithm, fixed objects and distant objects, when a vehicle is detected close to the blind zone, the indicator light flashes. At this time, the driver cannot see the vehicle in the blind zone, but he can also know that a vehicle is coming from behind and a collision occurs when changinges. It is dangerous. If the driver turns on the indicator light and prepares to changees without noticing the flashing of the indicator light at this time, the system will iue a BI BI BI alarm to remind the driver again that thee change time is dangerous and should not be changed.Throughout the driving proce, continuous detection and reminders can prevent traffic accidents caused by potential hazards such as bad weather, driver negligence, blind spots in the rearview mirror, and novices in the driving proce.The basic working principle of the BSD system is: turn on the system when the vehicle is driving. When a vehicle is found within the detection range of the ultrasonic r, the LED will light up to remind. When the turn signal is turned on and ready to changees, it will make a sound and the LED will be Light up reminder.Specification:Type: General Blind Movement Monitoring System (BSM)Power supply voltage: 12VMaximum power: 5W (maximum)Working temperature: -40℃～+85℃Storage temperature: -40℃～+85℃Waterproof rating: IP67Detection range: 0m-5m.Detection range accuracy: ±3cmThe package includes:1*controller2* probe1*buzzer1*Main wiring harne2*LED reminder light1*Acceory bag1*Warranty card

1*Instruction

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.