Car Emergency Breakdown Warning Triangle Red Reflective Safety Hazard Car Tripod Foldable Dangerous Failure Stop Sign Reflector

Product name: Tripod warning sign (small red box)Weight: 350gProduct size: 43*43*43cm (manual measurement, slight error)Packing size: length 44.5*5*3cmProduct features: strong reflective, foldableProduct Introduction:When the car is driving on the road, it is inevitable that there will be an emergency stop on the side of the road. At this time, the product can be useful. Whether it is during the day, at night or when the weather is bad, as long as it is placed a few meters away from the car, it can be pre-warned. Vehicles coming from behind, because they are reflective, so the light warning signs at night are very bright and eye-catching, and you can see them from far away. The foldable reflective triangle warning sign can be folded together when not in use, and it is convenient to carry. When you use it, you can open it and place it behind the car. It is a safety thing you need to prepare when driving out.Product features:1. Made of organic reflective material.2. Strongly reflective within 500 meters.Note:1. Take out the warning signs of the malfunctioning car from the packing box when in use, hold the bottom with your hand, and open the supports on both sides of the bottom respectively. Place the opened sign on the ground, pull up the left and right reflection sheets, and insert the pins on the left reflection sheet into the bottom of the opening groove of the right reflection sheet.2. Place the open reflective surface of the faulty car warning sign towards the direction of the incoming vehicle behind the faulty car, at an angle of 5° to the left of the vertical surface of the signboard and the vertical surface of the rear of the car, and place the ordinary road 30-100 meters behind the faulty car The highway is placed 100 meters behind the faulty car.3. When you stop using, retract the left and right reflectors and supporting feet in the reverse order of the aforementioned opening, and then put them in the packaging box. Pay attention to protect the red reflective surface and fluorescent surface when picking up the signs to avoid scratches. When connecting and disassembling the left and right reflectors, push in or pull out along the direction of the groove to avoid damaging the sign.  

window.adminAccountId=238616020;





?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=233&height=347&hash=580


?width=800&height=800&hash=1600


?width=800&height=800&hash=1600


?width=800&height=800&hash=1600


?width=800&height=800&hash=1600


?width=790&height=795&hash=1585


?width=800&height=800&hash=1600


?width=790&height=651&hash=1441


?width=790&height=1042&hash=1832


?width=750&height=750&hash=1500


?width=750&height=598&hash=1348


?width=750&height=539&hash=1289


?width=750&height=558&hash=1308


?width=750&height=557&hash=1307


?width=750&height=538&hash=1288