Car Paint Thickness Digital Tester Coating Gauge 0.01Mm/1Mil Depth Detector Black Meter With Screen LCD Display Calibration Function For Vehicles HW-300S

The measuring unit can be switched between mm and mil to facilitate different measurement requirements.
When measuring the paint thickness, the tester should be perpendicular to the test surface at 90.
This portable coating thickness gauge can measure the thickness of non-metallic coating (such as paint, film, etc.) on metal substrate quickly, non-destructively and accurately.
It is mainly used to measure the thickness of vehicle surface paint and other coatings.

Measurement step:
Step 1. Prepare the parts to be tested.
Step 2. Stay away from the metal object at least 2cm, press the switch key to turn on. Note: It is suggested that the instrument be zeroed with reference to "zero calibration" before
testing.
Step 3. The probe is placed vertically and quickly on the surface to be measured until the drop is heard, and the measured value is displayed on the screen, then the probe is lifted at least 2 cm away from the part to be measured, and the next measurement can be performed. Note: If the automatic shutdown function is enabled and no operation is performed within 3 minutes, the instrument will automatically shut down.

Specifications:
Material: ABS
Color: Orange, Black (optional)
Screen: Horizontal, Vertical (optional)
Measuring Range: 0 ~ 2000um
Accuracy: (3%+1um)
Resolution: 0um ~ 99.9um (0.1um) 100um ~ 999um (1um) gt; 1000um (0.01mm)
Zero Calibration: Support
Statistics: Average, Minimum, Maximum, Count
Unit: um,mm,mils
Minimum Convex Radian: 5mm
Minimum Concave Radian: 25mm
Minimum Measured Area: Diameter 20mm
Minimum Substrate Thickness: 0.2mm
Diameter 20mm Maximum Measuring Speed: 2 Readings Per Second
Operating Environment Temperature: 0 ~ 50°C 20 ~ 90% RH (non-condensing) Storage Environment Temperature: -10 ^ 60 C 20 ^ 90% RH (non-condensing)
Size: 113mmX53mmX24mm
Power Supply: 2 x 1.5V AAA battery(Free Alkaline Batteries Included)