Car Tire Manometro Dial Inflator High-precision Monitoring Inflation Gun With Inflator Hose Car Tire Pressure

Features:

Item Type: Dial Tire Preure

Application: Car, Van, Bus, Truck,Motorcycle, Bicycle, etc.

Display: LCD

Backlight: Yes

Unit: Psi, Bar, Kpa, Kg/cm2

Function: Inflation, Deflation, Preure , Preure Monitoring

Power Supply: 2x AAA Batteries (included)

Working Temperature: -20°C~65°C

Preure Range: 0-255Psi/0-18Bar/0-18Kg/cm2/0-1800KPA

Precision: ±0.3Psi/0.02Bar (Temperature in 20-30℃)

Resolution Ratio: 0.1Psi/0.01Bar/0.01Kg/cm2/1Kpa

Meterial: nylon,rubber,metal

Hose Length: about 40cm (without inflator)

Size: s show

Weight: about 470g

Operation:

Air inlet (G) of tire preure is connected to air source such as air compreor.(Only preure measured if without air source),

Twist the nozzle cap of the tire valve.

Insert the inflatable clip nozzle (H) vertically into the tire valve nozzle and ensure that there is no air leakage.

Pre the left on (C) to start the machine, and pre the right on (D) to switch the unit to BAR after the machine is started. After the adjustment, it will be automatically saved for the next use.(When the tire is connected, it will automatically turn on when the preure is detected, showing the actual tire preure.)

When the tire preure is too low, pre the handle (F) to inflate, and when it is too high, pre the exhaust valve (E) to deflate.

When the screen shows the air preure valueinflatedneeded done, remove inflatable clip nozzle (H). After 30 seconds, do not use automatic shutdown or pre the left on to shut down.

Probl and Solutions:

If there is too much water in the air compreor or the temperature difference in the use environment is large, the tire preure may appear negative preure and not shut down. Remove the battery and reinstall it to restore the default setting.

The backlight is dark and the display is not clear. Please note whether the icon of battery power is at low voltage, and rep the battery in time (2x AAA batteriesis used in the product).

Inflation is slow and air is not filled. Chewhether the preure of the air compreor is too low or the clamp is not completely open the valve core.

Note:

The product can not be directly inflated, which needs to be connected to air compreor and other air source equipment.

The product is powered by 2x AAA batteries.

To install or rep the battery, open the soft adhesive to see the battery compartment.

If the two keys cannot be preed at the same time, the calibration mode will be entered. Remove the battery and reinstall it.

The backlight will automatically turn off within 15 seconds. To turn it on again, pre the on on.

Convert by unit and select the desired unit. After the selected unit is shut down, it will be saved as the default unit.

Package Included:

1 x Tyre Preure

1 x Rubber Hose