Car Universalbsd BSD Blind Spot Detective System 24GHz Millimeter Wave Radar Lane Change Parking Reverse istance kit

Features:

1. Strong anti-interference capability.

2. Long detecting distance.

3. Intelligent algorithm,accurately judge whether the target is dangerous.

4. When the system is on, the system would start detecting objects in the blind area behind the vehicle 10 meters.

5. When moving objects get closer and faster than our own cars, LED and buzzer will give a warning.

Warning:This system is only auxiliary during the driving. Please operate according to the actual traffic conditions.

Specifications:

ADAS: Advanced Driving Aistance System

Working Voltage: DC 9~16V

Working Current: 190MA±5MA

Working Temperature: -40℃~+85℃

Static current: ≤1mA

Working frequency: 24GHZ~24.25GHZ

Speed range: ≤120KM/h

Detect range: Rear side 6 to12 meters

Warning: Buzzer and LED light

Brand: SPY

Product Description

Packing list:

Installation Method:1. After the bumper is removed, find a proper position for the probe module, Which is located on the arc surface of the bumper.2. Install the bracket and lock it tightly. The radar module is tighted a little bit with the supplied screw for further adjusting the angle(lock tightly later on).3. Set A reference line, which is in parallel to the rear of the car.4. Check the mounted angle like the picture shown below and then lock.5. Installation6. DiagramFunction Verification:Warning: The ACC cable must be controlled by the ignition switch of the car.