Centralized Lock Keyless Entry System Central Locking Car Alarm Accessories Door Windows E Control

Car Central Lock Keyle Entry With e Controls Suitable For All 12V Car ely Unlocking Doors And Tunk With Central Control Device Universal

e Locke UnlockElectric or pneumatic lockAutomatic Lock door and windowe Open Trunke Search Care WindowDirection Light FlashingOptional Horn OutputOne-Key LearningLed Indicator LightModel: TSK-405/T321

Features:ely lock and unlock your car.Central door lock automatically.Can be used in all kind of cars.Easy to install and to detach.The product is durable and portable.The price is favourable.

Specification:Control box size: 8.5 x 6 x 2.5cm (L x W x H)2 e Controllers size: 5.5 x 2.8 x 1cm (L x W x H)Distance: About 60 - 80 metersWorking Voltage: 12Ve Control Battery:CR2016 3VWorking Frequency: 433.92MHz

*Due to customs security and transportation restrictions, batteries cannot be placed in the package. This e control uses on batteries and the buyer should bring it by hims.

Please note that the corresponding battery should be selected according to different batches of goods.

If the mantia of the number is "C", a CR2032 battery is used.

Make sure to distinguish correctly.

Internal working scheme for central-controlling unit(A)

1.If the car is originally equipped with central-locking system and the driver's door has been installed with electric motor,the wiring can be made on the diagram below:(B.C)

(Figure B positive trigger wiring diagram)

(Figure C Negative trigger wiring diagram)

2.When the car is originally equipped with central-locking system and the driver's door is installed with only one switch,then a two wire actuator should be installed ,the wiring can be made based on the diagram below:(D)

(Figure D wiring diagram for positive trigger installation)

3.When the car is originally equipped with central-locking system (including in the driver's door),the wiring can be made based on the diagram below:(E)

(Figure E wiring diagram for positive electric circuit installation)

4.When the car is originally equipped with pneumatic central-locking system, the wiring can be made based on the diagram below:(F)

(when wiring as per this diagram,please cut of the jumper at the main unit.the central-controlling time is 4 seconds):

(Figure F wiring diagram for pneumatic circuit installation)

Suggestion:1.This module is a negative trunk signal output, some cars are positive trunk, then it needs to add a relay to convert it into a positive trunk signal.2.Please be sure to read the instructions, refer to the wiring diagram for operation and installation, and be operated by automotive profeionals. Some functions require the car to have related devices.3.Due to customs reasons, package transportation is restricted, and this product does not contain lithium batteries.

Feedback

1.Buyer's early confirmation will be highly appreciated after receiving the items.2.Since your feedback is very important to our busine development,we sincerely invite you to leave a positive feedback (Five Stars) for us if you are satisfied with our product and service.It will just take you 1 minute,but this 1 minute has the extremely vital significance to us.3. If you have any questions, please contact me immediately, I will provide the best solution and solve the problem in time, thank you!

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.