Control Card ST331 PCIe X1 AX99100 4S Industrial RS232 COM

Detailed Information About The Product:

AX99100 is a single-chip solution that fully integrates PCIe 2.0 Gen 1 endpoint controller and SerDes with various peripherals,
Such as two or four high-speed serial ports, one parallel port, I2C master device, high-speed SPI, local bus (ISA-Like) and GPIO.
It consists of four main configurations such as 2S (PCIe to Dual Serial), 2S+1P (PCIe to Dual Serial and Single Parallel), 2S+SPI (PCI-E to Dual Serial and SPI) and LB ( PCI-E to local bus/ISA -Like)
Suitable for different types of applications.
AX99100 is packaged in a 68-pin QFN package. It supports commercial-grade operating temperature range from 0 to 70°C and industrial-grade temperature range from -40 to 85°C.

Description:
Material: PCB
Color as shown
PCI Express
Single-lane (X1) PCI Express endpoint with integrated PHY controller
Complies with PCI Express card specifications, PCI Express 2.0 Gen 1
PCI Power Management 1.2 compliant
Supports legacy and MSI interrupts, ASPM power management
RS-232 serial interface
Dual or Quad UART
Support RS-232/RS-422/RS-485 multi-protocol
Bidirectional speeds up to 25 Mbps per port
Full serial modem control
Support hardware and software flow control
Supports 5, 6, 7, 8 and 9-bit serial formats
Supports even, odd, none, space and mark parity
Supports custom baud rates via internal PLL or external clock
Supports on-chip 256-byte depth FIFO, transmit and receive paths for each serial port
Support remote wake and power
Management functions
Serial transceiver shutdown support
Support slow IrDA mode (115200bps)
on all serial ports
Supports multipoint applications in 9-bit mode
Support DMA burst transfer

Package Contents:
1 x PCI-E AX99100 4S Serial Port Card
1 x CD-Driver
Note:
Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.