DC 12V Car Side Mirror Gl Heating Element / Rearview Mirror Heating Pad QuiRemove Fog/Rain/Frost

If you need an automatic timer switch module, you can purchase it at this link
https://www..com/item/1005007932008302.html

Description

Universal DC 12V Car Side Mirror Heating Pad

XXX A pair=Left Side heating pad+Right Side heating pad

Only Wire No =only Wire+Switch+Fuse no heating pad

Ideal for rain and icy seasons Safe Driving
We are factory Accept bulk Customization（There are certain quantity requirements）

Voltage: DC 12 V
：8-15Ω
Suitable for most DC 12V Cars

If you need DC 24V for your truck, you can find it in the Store Trucks Category

Since the product link shows a maximum of 36 products,
other products can be found in our related categories.
If your model is not available
T310 350 H7 S01 can fit 99% of the models,

How to install heating pad

1: Carefully remove the side mirror from the car

2: Use a heating tool or hairdryer to heat the area around and on the baof the gl,
e it easier to separate the from the Mirror holder.

3: Peel off the adhesive paper on the baof the heating pad and stithe heating pad to the baof the gl.

4: If the gl and the mirror holder were ly d to each other.
The gl need to be reattached using double sided tape or other adhesive tools on the mirror holder.

5: If the frame is wrapped with a frame, just put the gl backthe holders can be heated first

How to connect the circuit?

1: Wired in parallel to the rear window heating switch
or install a separate switch take ACC power from the fuse box

2: The circuit schematic is shown below

Due to the large number of models, we do not provide physical manuals. Please refer to the introduction of this link