DC-DC 10-70V to 5-58V 30W 180W Boost Buck Converter CC CV Power Supply Module Adjustable Step Up/Down Module Voltage Regulator

DD4012SA 1A DC 5V 6V 9V 12V 24V to 3.3V 5V DC-DC Step-Down Buck Converter Regulator Module Board
USD 0.75-0.78/piece
DC/DC 12V to 5V 3A 15W Car Power Buck Converter Regulator Step Down Voltage Power Supply Output Adapter Low Heat Auto Protection
USD 1.30-1.84/piece
300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Board Electrolytic Capacitor
USD 3.16/piece
+- 5V 6V 9V 12V 15V 24V Positive Negative Dual Output Power Supply DC DC Step-up Boost Converter Module ADC DAC LCD Power Supply
USD 1.42-1.80/piece
5Pcs Mini 360 DC-DC Buck Converter Step Down Power Supply Module 4.75-23V to 1-17V 340KHz 17x11x3.8mm
USD 2.02/lot
DD4012SA 1A DC 5-40V to 3V 3.3V 3.7V 5V 6V 7.5V 9V 12V Regulator DC-DC Buck Step-Down Converter Regulator Module Board
USD 1.04/piece



Module parameters:
Module nature: non-isolated voltage regulator
Input voltage: 10.5-70VDC Please derate when the power supply voltage is lower than 12V
Input current: 10A max, long time 8A max
Output voltage: 5-58VDC
Applications where the adaptive input voltage is higher or lower than the set output voltage
Output current: 8A max, long time 6A max, do not allow the input and output current to work at the maximum value, and the sum of input and output currents cannot exceed 12A
Constant current adjustable: 0.5-8A
Output power: 180W max when working at low voltage, the maximum current is 8A, the bare board has no auxiliary heat dissipation, the maximum output is 30W, with a heat sink and no fan, the maximum output is 50W, when the module temperature exceeds 65 degrees, heat dissipation needs to be strengthened
Standby current: about 20ma
Conversion efficiency: about 90%
Input anti-reverse connection: None, please confirm the positive and negative before powering on
Dimensions: 70*52*21MM (bare board)
70*52*46MM (with heat sink and fan)
Weight: about 70g bare board, about 120g with heat sink, about 135g with heat sink, fan
 
 
Features:
Use high thermal conductivity aluminum substrate to adjust the meter, convenient for external radiator
Input ultra-wide range, capable of boosting, stepping down, and stabilizing
Achieve 0 input and output voltage difference, adjustable output voltage
 
Output voltage/current adjustment method:
1. Adjust the constant voltage adjustable potentiometer (decrease the voltage clockwise, increase the voltage counterclockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V.
2. Adjust the constant current adjustable potentiometer clockwise about 20 turns, set the output current to the minimum, connect the LED, and adjust the constant current adjustable potentiometer to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust to the current you need. (When used for charging, you must use the discharged battery to adjust it, because the more the battery is left , The smaller the charging current.)




">