DC-DC Boost Converter 1800W 40A 10V-60V to 12V-90V Boost Power Module 1200W 20A 8-60V to 12-80V Adjustable Power Board Boost

DC-DC Boost Converter 1800W 40A 10V-60V to 12V-90V Boost Power Module 1200W 20A 8-60V to 12-80V Adjustable Power Board

1200W 20A


Specifications:
Input voltage: 8-60V
Input current: 20A
Static current: 15mA (12V output 20V, the higher the output voltage, the larger the current, the calmer)
Output voltage: 12-80V continuously adjustable
Output current: 20A MAX exceeds 15A, please increase heat dissipation (input and output pressure are related, the higher the pressure, the smaller the output current)
Constant range: 0.5-20A
Output power: Input voltage * 20A, for example: input 12V * 20A = 240W, input 24V * 20A = 480W
Enter 36V x 20A = 720W, 48V x 20A = 960W, 60V x 20A = 1200W
Working temperature: -40 ~ + 85 degrees (ambient temperature is too high, please strengthen heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 95%
Size: 116×52×15mm


1800W 40A

Features:
1. With constant current function, can be used for car battery boost, battery charging, etc.
2. The use of wind blade heat dissipation, heat dissipation effect is very good, higher output power.
3. Super size ferrosilicon aluminum magnetic ring, using four 1.2 pure copper enameled wire, low heat, high efficiency.
4. The main power tube insulation board is made of high-quality alumina, and the thermal conductivity is 10 times that of ordinary insulation pads.
5. Temperature control fan, using hydraulic bearing fan, achieved a good balance in terms of noise and heat dissipation. When the load is light, the fan does not rotate. When the load temperature reaches about 60 ° C, the fan automatically rotates. It can effectively reduce noise and extend service life.

Specifications:
Output power: 1800W
Input voltage range: 10V-60V
Output voltage range: 12V-90V
Input current: 40A
Output current: 22A
Conversion efficiency: 48V to 60V 8A (98.1%)
48V to 72V 8A (98.1%)
48V 84V 8A (97.6%)
Charge adjustment: 10% to 50% charge (72V output)
Temperature coefficient: 50% load
Ripple and noise: 20MHz bandwidth (48V-72V4A) 100mVp-p
Switching frequency: VIN = 48V VO = 72V 4A (110khz)
No-load current: VIN = 48V VO = 72V (18mA)
Enter reverse protection: Yes
Storage humidity: 95%
Operating temperature: -20 65 °C
Storage temperature: -40 125 °C
Temperature rise during operation: 48V to 60V 5A (45 °C)
Overheat protection: 60°C
Wiring mode: Input, output (no welding, terminal)
Heat dissipation mode: strong air cooling appearance

Parcel list:
Boost converter *1






">