DC12.8V Motorcycle LED Flasher Relay Simple Using LED T

Feature:

1. Suitable Models: Our LED Flasher is suitable for CB650SC CX650C VT700C CB700SC VF700F RVF750R VF750C VF750F VF750S VT750C and for Kymco 100 and for Jinli 110, for Freeway 125. And for ZONTES 350D GY6 125 WY125.
2. Rated Value: The LED turn signal relay has a rated operating voltage of DC12.8V, a rated load current of 1 to 20A, and a rated load power of 1 to 240W.
3. Anti Flashing: The contacts of the LED turn signal relay can pass a maximum current value of 20 A. Anti Flashing, this relay is as versatile on LED as it is on regular bulbs.
4. Working Process: The flasher relay is designed for motorcycle with LED taillights and front turn signals as well as rear turn signals.
5. Easy to Use: Simply replace the original flasher under the dashboard plug and make sure to connect the black cable to the motorcycle.

Specification:

Item Type: LED Turn Signal Relay
Material: ABS
Product Size: Approx. 35 x 63mm / 1.4 x 2.5in
Rated Working Voltage: DC12.8V
Rated Load Current: 1-20A
Rated Load Power: 1-240W
Frequency(C/min): 80c±10c/min
Noise Level: 85±10dB
Weight: Approx. 33g / 1.16oz

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}

Package List:

1 x Motorcycle LED Flasher

Note:

1. This product is adapted to the motorcycle model modification, but must be operated in strict accordance with the following methods.2. Most of the motorcycles on the market after the conversion of LED turn signal flashing frequency, not flashing problem, this is due to the original turn signal power and LED light power difference is too large. Some motorcycle flashers are two wire system, with only one positive power "B" and one load output "L". Therefore, after the modification of LED turn signals, the problem of the upper art must be replaced with a special LED flasher to solve these problems.