DCDC 10A 180W Boost Buck Converter 10.570V To 558V Step Up Down Power Supply Module

Description:
Made with high quality electronic component for high stability and performance.
High output current, the maximum output current can reach 8A.
Using high thermal conductivity aluminum heat sinks for quick heat dissipation.
Applicable to LED driver, vehicle power supply, battery charging, regulated power supply, etc.


Specifications::
Input current: Maximum 10A
Continuous input current: Maximum 8A
Output current: Maximum 8A
Continuous output current: Maximum 6A
Constant current adjustable: 0.5-8A
Output power:
Maximum 180W
Standby current: About 20mA
Conversion efficiency: About 90%
Reverse polarity protection: No, please first determine positive and negative and then power on
Dimensions: Approx. 70 x 52 x 21mm / 2.76 x 2.05 x 0.83in
Weight: 74g (approx.)
2. Adjust the current adjustment potentiometer clockwise by about 20 turns to set the output current to the minimum, connect the LED, and adjust to the current you need. For battery charging, after the battery is fully discharged, connected the battery to the output and adjust to the current you need. Please do not adjust the current by short circuit due to the circuit structure of this boost buck module.


Package list:
1 x Boost Buck Converter
Note:
1. The input and output current cannot work at the Maximum value, and the input plus output currents can not exceed 12A
2. When the module temperature exceeds 65 ℃, heat dissipation needs to be strengthened.
.