Digital 12V/24V AUTO Solar Controller 30A Without Setting MPPT-Solar Charge Controller, Auto Tracking Solar Panel Regulator with LCD Display

Features:
*This is a 12V-24V general-purpose solar charge controller. When start the solar charge controller so that it can work normally..
it for the first time, please make sure that the battery has enough power t
*The battery cable should be as short as possible to minimize loss.
*The scope of use of solar charge controllers: Leads acid batteries(OPEAGM, GEL), ternary lithium battery, lithium iron phosphate battery.
*The charge regulator is only suitable for regulating solar modules.u Never connect another charging source to the charge regulator.
*Build-in industrial mini controller.
*Big LCD display, all adjustable parameter.
*Fully 3-stage charge management.
*Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
*4 way USB output, the maximum current of 2A, to support Ap mobile phone charging.

Specification:
Part Name: Solar Controller
Color: White
Material: ABS
Size：185*95*25mm
Batt voltage： AUTO
Charge current：30A
Discharge current：10A
Max solar input:12V battery, the highest 23V;24V battery when the highest 46V
Battery type:b01=Leads acid battery 12V/24Vauto;b02=Lithium-ion battery (lithium battery) 3 strings 3.7V=1;b03=Lithium iron phosphate battery 4 strings 3.2V=12.8V
Equalization:14.4V(b01);12.6V(b02);14.6V(b03)
Discharge stop:10.7V(b01);9V(b02);10V(b03)
Discharge reconnect:12.6V(b01);10.5(b02);12V(b03)
Voltage of open light:Solar panel 8V(Light lights delay)
Voltage of close light:Solar panel 8V(Light off delay)
USB output:4 way USB output, 5V/2A(MAX)
Self-consume:<10mA
Operating temperature:-35 ~ +60℃